Can you please tell me how to do that...I am using ASUS ROG GL553VE with Windows 10 i have tried to look up how to change boot arguments and also tried looking up that specific argument....but i really cannot get any answers on how to actually do that
also it would be a big help if you can tell me how to change boot args for the USB as after making bootable USB with DD Mode of Rufus, my windows wont show it in the devices On Monday, 20 May 2019 04:51:22 UTC+5:30, Adam Lewis wrote: > > Key changes required to get working were to set the following boot arg for > both the installer USB and the live system > * efi=no-rs > > The installer USB also required the nouveau blacklist args: > 1. nouveau.modeset=0 > 2. rd.driver.blacklist=nouveau > 3. video=vesa:off > > The final iso to USB method used was the Fedora Media Writer with Qubes > R4.0.1 iso onto an HP 32 GB usb. Many USBs and writing methods were used, > but I can't say which would have worked if I'd gotten my boot args right > initially. > > Altering boot args was difficult, since mounting the /dev/sdX2 partition > didn't allow direct manipulation of the BOOTX64.cfg file. Upon advisement > from #qubes on freenode irc, I copied the file, altered it, and then moved > it back in place on the USB partition, which worked well. > > Post installation, Qubes configuration after initial boot had to be done > with TABs, because the mouse did not appear to work properly. After > configuration, I found that the touchpad behavior seemed to depend on using > a very specific section (top right corner, it seems). USB mouse was a > preferred alternative, but it may be true that the initial configuration > could have been done with the touchpad mouse if I'd known about the > sensitive areas. > > Without efi=no-rs, post install allowed LUKS decryption before going black > and freezing. > > Thanks to all who helped me figure this out, and hopefully this is > sufficient payback for the support I got :), > Adam/ilsonno > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7734f22c-8896-4c56-ba68-35c4f610758d%40googlegroups.com.
