On 1/23/19 8:07 PM, Achim Patzner wrote:

>> Only problem is the ethernet
> 
> That's not a problem with "permissive=true" and "no-strict-rest=true".

I'm fighting with this laptop, but no luck using the Ethernet interface :(

Tried all mentioned qvm-pci options, but the result is always the same:

> [   15.149961] ------------[ cut here ]------------
> [   15.150028] NETDEV WATCHDOG: ens6 (e1000e): transmit queue 0 timed out
> [   15.150093] WARNING: CPU: 0 PID: 0 at 
> /home/user/rpmbuild/BUILD/kernel-latest-5.8.16/linux-5.8.16/net/sched/sch_generic.c:443
>  dev_watchdog+0x259/0x260
> [   15.150166] Modules linked in: xt_nat nft_ct nf_tables nfnetlink rfkill 
> xt_REDIRECT ip6table_filter ip6_tables ipt_REJECT nf_reject_ipv4 xt_conntrack 
> iptable_filter xt_MASQUERADE iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 
> nf_defrag_ipv4 joydev intel_rapl_msr drm_vram_helper drm_ttm_helper 
> intel_rapl_common ttm crct10dif_pclmul crc32_pclmul crc32c_intel 
> drm_kms_helper ghash_clmulni_intel rapl cec snd_pcm snd_timer ehci_pci snd 
> e1000e soundcore pcspkr drm ehci_hcd serio_raw ata_generic i2c_piix4 
> pata_acpi floppy xenfs xen_netback u2mfn(O) xen_privcmd xen_gntdev 
> xen_gntalloc xen_blkback xen_evtchn ip_tables overlay xen_blkfront
> [   15.150409] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O      
> 5.8.16-1.qubes.x86_64 #1
> [   15.150466] Hardware name: Xen HVM domU, BIOS 4.8.5-25.fc25 10/20/2020
> [   15.150516] RIP: 0010:dev_watchdog+0x259/0x260
> [   15.150560] Code: 48 85 c0 75 e4 eb 9b 4c 89 ef c6 05 f4 b2 de 00 01 e8 1b 
> bf fa ff 89 d9 48 89 c2 4c 89 ee 48 c7 c7 50 24 46 82 e8 47 e1 6a ff <0f> 0b 
> e9 7a ff ff ff 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41
> [   15.150652] RSP: 0018:ffffb49640003e78 EFLAGS: 00010286
> [   15.150695] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 
> 0000000000000000
> [   15.150747] RDX: 0000000000000001 RSI: 00000000000000f6 RDI: 
> 0000000000000300
> [   15.150799] RBP: ffff9ccc100d03dc R08: ffffb49640005000 R09: 
> 00000000000001ee
> [   15.150851] R10: ffffb49640003f08 R11: ffff9ccc15c6af80 R12: 
> ffff9ccc132f3280
> [   15.150903] R13: ffff9ccc100d0000 R14: ffff9ccc100d0480 R15: 
> 0000000000000001
> [   15.150957] FS:  0000000000000000(0000) GS:ffff9ccc17000000(0000) 
> knlGS:0000000000000000
> [   15.151012] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   15.151061] CR2: 00007b0a14090064 CR3: 0000000007e04001 CR4: 
> 00000000001606f0
> [   15.151117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
> 0000000000000000
> [   15.151170] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 
> 0000000000000400
> [   15.151222] Call Trace:
> [   15.151258]  <IRQ>
> [   15.151296]  ? pfifo_fast_reset+0x110/0x110
> [   15.151338]  call_timer_fn+0x2d/0x130
> [   15.151498]  run_timer_softirq+0x37b/0x930
> [   15.151542]  __do_softirq+0x11a/0x2d9
> [   15.151583]  asm_call_irq_on_stack+0x12/0x20
> [   15.151626]  </IRQ>
> [   15.151662]  do_softirq_own_stack+0x37/0x40
> [   15.151702]  irq_exit_rcu+0xd1/0xe0
> [   15.151742]  sysvec_xen_hvm_callback+0x34/0x80
> [   15.151787]  asm_sysvec_xen_hvm_callback+0x12/0x20
> [   15.151831] RIP: 0010:native_safe_halt+0xe/0x10
> [   15.151875] Code: ff eb bc cc cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 
> 2d 96 25 46 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 86 25 46 00 fb f4 <c3> cc 
> 0f 1f 44 00 00 41 55 41 54 55 53 e8 30 0e 5c ff 65 8b 2d e9
> [   15.151966] RSP: 0018:ffffffff82603dc0 EFLAGS: 00000246
> [   15.152009] RAX: 0000000000004000 RBX: ffff9ccc154de800 RCX: 
> 0000000000000034
> [   15.152061] RDX: 4ec4ec4ec4ec4ec5 RSI: ffffffff8277c660 RDI: 
> ffff9ccc154de864
> [   15.152114] RBP: ffff9ccc154de864 R08: 000000002d3d6f42 R09: 
> 0000000000000000
> [   15.152166] R10: 0000000000000018 R11: 00000000ffffffff R12: 
> 0000000000000001
> [   15.152219] R13: 0000000000000001 R14: 0000000000000001 R15: 
> ffffffff82614840
> [   15.152273]  acpi_safe_halt+0x1c/0x30
> [   15.152313]  acpi_idle_enter+0xe6/0x280
> [   15.152353]  cpuidle_enter_state+0x81/0x430
> [   15.152393]  cpuidle_enter+0x29/0x40
> [   15.152433]  do_idle+0x231/0x2f0
> [   15.152473]  cpu_startup_entry+0x19/0x20
> [   15.152516]  start_kernel+0xa64/0xaa8
> [   15.152558]  secondary_startup_64+0xb6/0xc0
> [   15.152598] ---[ end trace 0e449a39d5e1e47c ]---

I also having these errors:

> [   15.154783] e1000e 0000:00:06.0 ens6: Reset adapter unexpectedly
> [   18.906826] e1000e 0000:00:06.0 ens6: NIC Link is Up 1000 Mbps Full 
> Duplex, Flow Control: Rx/Tx
> [   21.104136] e1000e 0000:00:06.0 ens6: Detected Hardware Unit Hang:
> [   21.104136]   TDH                  <0>
> [   21.104136]   TDT                  <1>
> [   21.104136]   next_to_use          <1>
> [   21.104136]   next_to_clean        <0>
> [   21.104136] buffer_info[next_to_clean]:
> [   21.104136]   time_stamp           <fffbb4b0>
> [   21.104136]   next_to_watch        <0>
> [   21.104136]   jiffies              <fffbbd42>
> [   21.104136]   next_to_watch.status <0>
> [   21.104136] MAC Status             <80083>
> [   21.104136] PHY Status             <796d>
> [   21.104136] PHY 1000BASE-T Status  <3800>
> [   21.104136] PHY Extended Status    <3000>
> [   21.104136] PCI Status             <10>


tried with kernel latest, and kernel 4.19

Can you give me some details how are you menaged to use it?


Given the fact that
 - the external monitor not working,
 - the CPU is mostly around 90C, then the fan is always sounds like jet.

a I'm tending to throw away this crap pretty soon. :((


-- 
Zrubi

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/82a020b9-158b-c34f-bb9d-740af17b6a59%40zrubi.hu.

Attachment: OpenPGP_0x617D70488F0E7BC6.asc
Description: application/pgp-keys

Attachment: OpenPGP_signature
Description: OpenPGP digital signature

Reply via email to