Heiko Gerstung wrote: > David J Taylor wrote: >> Heiko Gerstung wrote: >> >>> David J Taylor wrote: >>> >> The event log gives: >> >> ntpd [EMAIL PROTECTED] Apr 07 12:01:06 (UTC+02:00) 2005 (3) >> precision = 5.000 usec >> Listening on interface wildcard, 0.0.0.0#123 >> Listening on interface Loopback Interface 1, 127.0.0.1#123 >> Listening on interface IP Interface 2, 192.168.0.2#123 >> Cannot find suitable interface for address 82.225.138.2 >> configuration of 82.225.138.2 failed >> Cannot find suitable interface for address 84.16.227.200 >> configuration of 84.16.227.200 failed >> Cannot find suitable interface for address 131.211.80.155 >> configuration of 131.211.80.155 failed >> clock LOCAL(1) event 'clk_fault' (0x03) > Yes, that's the #450 bug ... > >> The 1370 version gives similar errors, starting: >> >> ntpd [EMAIL PROTECTED] Apr 12 14:10:45 (UTC+02:00) 2005 (12) >> >> (I was wrong about it being the same version, but they are both dated >> April). > That's only when they were compiled, I prepared the two installer > versions in April, it does not say anything about the age of the > sources. >> >> I can't account for the three addresses: 82.225.138.2, 84.16.227.200 >> and 131.211.80.155. My guess is that they might be the three >> addresses from the europe ntp pool which your installation procedure >> configured (would have been nice to have UK pool addresses there as >> well). > I started with a version containing a list of all countries with own > pool servers, but a lot of these countries only have very few pool > servers, therefore I decided to go with the regional pools. > > Of course you can add your uk pool servers during installation by > entering their hostnames in the field below the drop down box (I bet > you already knew that, sorry...). > >> Let me know if you need more information. > There is nothing we can do at the moment, we need to get bug #450 > fixed. Until then, you can stick with my workaround version > (1.1397)... >> Cheers, >> David > > Kind regards, > Heiko
Heiko, OK. I'm sorry that this doesn't add any more to what you already knew about the bug #450, but the report is there for completeness. Your 1397 version works just fine, for me (with a single network card). Yes, I know I can add the servers by hand, but as you have other entries for the pool servers I though it might be nice to add the UK ones as well. Plus other countries in Europe should you have any free time left! (Free time, what's that?) Cheers, David _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
