Hi:
-ntpq -p display from server unit (version 4.1):
remote refid st t when poll reach delay offset
jitter
==============================================================================
*LOCAL(0) LOCAL(0) 5 l 12 64 377 0.000 0.000
0.004
- /etc/ntp.conf from the server unit (version 4.1):
server 127.127.1.0 burst iburst
authenticate no
-ntpq -p display from querying unit (version 4.1):
remote refid st t when poll reach delay offset
jitter
==============================================================================
192.168.10.38 0.0.0.0 16 u 6 64 0 0.000 0.000
4000.00
- /etc/ntp.conf from the querying unit (version 4.1):
server 192.168.10.38 burst iburst
authenticate no
-Also this is what I get from the unit querying time from the server
when I run ntpd -d:
transmit: at 92 192.168.10.63->192.168.10.38 mode 3
receive: at 92 192.168.10.63<-192.168.10.38 mode 4 code 1
packet: bad header 020
transmit: at 110 192.168.10.63->192.168.10.38 mode 3
receive: at 110 192.168.10.63<-192.168.10.38 mode 4 code 1
packet: bad header 020
Which means I am able to send and receive but the packet is not passing
sanity checks.
Thansk for your help
_______________________________________________
questions mailing list
[email protected]
https://lists.ntp.isc.org/mailman/listinfo/questions
