*If* you are synchronizing to a PPS signal, the documentation states: http://www.cis.udel.edu/~mills/nanokernel/proof.html
> Because of the way these data are recorded, the residual phase > measurements shown in the loopstats file are misleading when the > PPS signal is the synchronization source The doc goes on to state: > Accurate phase measurements can be determined by running grep > on the peerstats file and looking for the string "127.0.0.1". Note, the 127.0.0.1 is incorrect and should be the reference clock address (e.g., 127.127.20.0 for an nmea gps at /dev/gps0). So, according to the doc, the offset in loopstats, when synching to a PPS device, is inaccurate. John _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
