Hi, I am running ntpd(version 4.1.1) from the uclinux-dist in my target(microblaze) running at 60mhz and trying to sync my system time with one of the internal server which has startum 1 source. I am getting a periodic time slip with clock moving from stratum 2 to 16 and back to stratum2. I am not sure is it uClinux/microblaze specific. I used the default config.h for the uclinux.
I used the same config.h to configure it to run in the native desktop linux passing the same ntp.conf and i see it is getting synchronised one shot and no drift after that (in the last one day atleast). So i am just wondering is it specific to uClinux/microblaze as it works ok on the native linux. Has anybody running ntpd successfully without stratum drift in the uclinux? I posted the same question in the uclinux forum. Any pointers on what may be the reason this is happening will be really helpful. Thanx - Prasad ============================================================== 6>May 16 02:23:08 ntpd[143]: osys_peer != sys_peer Event: Peer Stratum Change <5>May 16 02:23:08 ntpd[143]: time set -0.004777 s <6>May 16 02:23:08 ntpd[143]: Clock was Stepped.Event ClockReset.synchronisation lost <6>May 16 02:23:08 ntpd[143]: Leap not in Sync.Report SyncChnage <6>May 16 02:26:27 ntpd[143]: osys_peer != sys_peer Event: Peer Stratum Change <6>May 16 02:26:27 ntpd[143]: Leap not in Sync.Report SyncChnage <6>May 16 02:26:27 ntpd[143]: ostratum = 16 sys_stratum=2 <6>May 16 02:26:27 ntpd[143]: clock_update ostratum != sys_stratum Event: Peer Stratum Change <5>May 16 02:39:17 ntpd[143]: time reset 0.397058 s <6>May 16 02:39:17 ntpd[143]: Clock was Stepped.Event ClockReset.synchronisation lost <6>May 16 02:39:17 ntpd[143]: ostratum = 2 sys_stratum=16 <6>May 16 02:39:17 ntpd[143]: clock_update ostratum != sys_stratum Event: Peer Stratum Change <6>May 16 02:42:31 ntpd[143]: osys_peer != sys_peer Event: Peer Stratum Change <6>May 16 02:42:31 ntpd[143]: ostratum = 16 sys_stratum=2 <6>May 16 02:42:31 ntpd[143]: clock_update ostratum != sys_stratum Event: Peer Stratum Change ============================================================== ntpdc -p remote local st poll reach delay offset disp ======================================================================= *192.168.1.199 192.168.1.104 1 64 37 0.00174 -0.596261 0.43750 =ems02.your-free 192.168.1.104 3 64 37 0.00000 0.000000 0.43750 _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
