On 30 May 2006 08:57:07 -0700 in comp.protocols.time.ntp,
[EMAIL PROTECTED] wrote:
>i have a standalone win2k3 server , i wish to configure against a ntpd
>on linux.
>I have configured the following regestery key's according to MS
>document :
>HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\SpecialPollInterval
>w32tm /config /manualpeerlist:NTP_server_IP_Address,0x8
>/syncfromflags:MANUAL
>the clock on win2k3 server sync's after this , but i can't get it to be
>done automatically.
>when i reissue >w32tm /resync command the clock resync's.
>How do i configure the sync to be preformed every 15 min's ?
What is special poll interval set to? Recommend 1024 to 86400.
You might want to add a few redundant time servers to the peer list
from the NTP pool servers or local stratum *2* *open* public servers.
What is 0x8? Is that the internal clock tick?
--
Thanks. Take care, Brian Inglis Calgary, Alberta, Canada
[EMAIL PROTECTED] (Brian[dot]Inglis{at}SystematicSW[dot]ab[dot]ca)
fake address use address above to reply
_______________________________________________
questions mailing list
[email protected]
https://lists.ntp.isc.org/mailman/listinfo/questions
