Hello Mike, > If you can dispense with the rs-232-> usb , then why not try > connecting to DCD and using the SHM driver in conjunction > with Jonathan Buzzards DCF radioclock daemon. > http://www.buzzard.me.uk/jonathan/radioclock.html
thank you very much. Works great :) > There is no needfor any particular baud rate to be set > as there is no host -> refclock comms. You would probably > need to check the polarity of the signal as it uses assert > to start the timing of interrupts and signal pulse length > on the DCD pin. I've modified radioclock to invert DCD for a first test. Now our hardware group have to do this right... Thanks, Reinhold _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
