Hello I've one of theese DCF77 Clocks on an old printer cable (LPT).
Now I want ntpd to look at this clock too. I'm a little confused about the documentation. the program "pcf" runs well on my suse linux (10.0). Do I need to run "pcf" in order to force ntpd to use this device? I don't think so. When I tried to start ntp before - with this line in ntp.conf server 127.127.35.0 and with a symlink /dev/pcfclock0 -> /dev/lp0 then theese messages come up in ntp.log: 28 Jan 17:15:08 ntpd[5941]: clock PCF(0) event 'clk_fault' (0x03) 28 Jan 17:18:20 ntpd[5941]: synchronized to LOCAL(0), stratum 10 28 Jan 17:18:20 ntpd[5941]: kernel time sync disabled 0041 28 Jan 17:19:23 ntpd[5941]: kernel time sync enabled 0001 Thanx for any hint. Christian Here the output of "ntpd -d": *** ntpd [EMAIL PROTECTED] Fri Sep 9 17:17:17 UTC 2005 (1) addto_syslog: ntpd [EMAIL PROTECTED] Fri Sep 9 17:17:17 UTC 2005 (1) addto_syslog: precision = 1.000 usec create_sockets(123) bind() fd 6, family 2, port 123, addr 0.0.0.0, flags=8 addto_syslog: Listening on interface wildcard, 0.0.0.0#123 bind() fd 8, family 10, port 123, addr ::, flags=0 addto_syslog: Listening on interface wildcard, ::#123 bind() fd 9, family 2, port 123, addr 127.0.0.1, flags=0 addto_syslog: Listening on interface lo, 127.0.0.1#123 bind() fd 10, family 2, port 123, addr 192.168.5.5, flags=8 addto_syslog: Listening on interface eth1, 192.168.5.5#123 init_io: maxactivefd 10 local_clock: time 0 clock 0.000000 offset 0.000000 freq 0.000 state 0 key_expire: at 0 peer_clear: at 0 assoc ID 30684 refid INIT starting PCF with device /dev/pcfclock0 newpeer: 127.0.0.1->127.127.35.0 mode 3 vers 4 poll 6 10 flags 0x21 0x1 ttl 0 key 00000000 key_expire: at 0 peer_clear: at 0 assoc ID 30685 refid INIT newpeer: 127.0.0.1->127.127.1.0 mode 3 vers 4 poll 6 10 flags 0x21 0x1 ttl 0 key 00000000 addto_syslog: frequency initialized -26.376 PPM from /var/lib/ntp/drift/ntp.drift local_clock: time 0 clock 0.000000 offset 0.000000 freq -26.376 state 1 report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010) refclock_transmit: at 1 127.127.35.0 addto_syslog: clock PCF(0) event 'clk_fault' (0x03) clock PCF(0) event 'clk_fault' (0x03) auth_agekeys: at 1 keys 1 expired 0 timer: refresh ts 0 refclock_transmit: at 2 127.127.1.0 refclock_receive: at 2 127.127.1.0 peer LOCAL(0) event 'event_reach' (0x84) status 'unreach, conf, 1 event, event_reach' (0x8014) refclock_sample: n 1 offset 0.000000 disp 0.010000 jitter 0.000001 clock_filter: n 1 off 0.000000 del 0.000000 dsp 7.937500 jit 0.000001, age 2 addto_syslog: ntpd exiting on signal 2 *** _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
