>Now i think it's probably an network issue. >A few hours after starting ntpd it always looks like this > remote refid st t when poll reach delay offset >jitter >============================================================================== > bigben.solnet.c 195.66.241.3 2 u 849 1024 377 2033.34 992.089 > 0.816 > elk.trapper.ch 10.0.0.2 2 u 928 1024 377 2186.13 964.833 >22.731 ...
Are you on the end of a slow and busy link? That's a 2 second delay. The offset of 1 second makes me think that the system got started when the link was idle and now the round trip time is 2 seconds. ntp will assume that the delay is symmetric. You would see something like this if all (most) of the delay was in one direction. Note the reach data of 377 shows that no packets are getting lost. -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
