Nooshin Madjdi wrote: > Hi > Thanks for your help > > ok i did so,which i should confess that ntpd was installed by Relay > Application. now i have this problem > > the clock of the Relay is Set to > GMT +3:00 > but i live in a country which time is GMT +3:30 , so the time of windows is > GMT +3:30 , i have set the ntp.conf so the relay should sunchroize itself > with time of windows ,which doesn't, Relay always have 30 minutes down the > actual time. if i set the windows clock to GMT +3:00 , so everything is > fine, but i am in GMT +3:30 , does NTP client gets the actual time or just > the Base time of GMT? > > and one more question, do you any sites which i can get help on commands > used in ntp.conf. i saw the ntp.org but couldn't find any specific document > on that subject. >
NTP does not deal with time zones at all! It synchronizes your clock to UTC (formerly known as GMT). Getting your O/S to display the local time is a matter of setting the correct time zone. If your O/S does not provide support for your local zone then you need to: get it fixed, get a better O/S, relocate to a more "standard" time zone, or learn to live with the problem. _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
