Hello, I'm new in questions relaetd with NTP, so I've got lost browsing the correct answer for my problema around the WWW.
I have Win2K domain with two DC... I would like my RedHat Enterprise Linux servers get synchronized to the PDC through NTP. I have installed ntpd and wrote my /etc/ntp.conf file like this: server mypdc prefer server theotherdc driftfile /var/lib/ntp/drift Then I have installed the server and started it: chkconfig ntpd on /etc/init.d/ntpd start But I doesn't get synchronized... I found nothing on /var/log/messages about any error... ntpdate seems to work ok at command line with both hosts... but if I type ntpd -d -q I get this error: [EMAIL PROTECTED] ~]# ntpd -d -q ntpd [EMAIL PROTECTED] Mon Oct 11 09:10:20 EDT 2004 (1) addto_syslog: ntpd [EMAIL PROTECTED] Mon Oct 11 09:10:20 EDT 2004 (1) addto_syslog: precision = 2.000 usec create_sockets(123) addto_syslog: bind() fd 4, family 2, port 123, addr 0.0.0.0, in_classd=0 flags=8 fails: Address already in use addto_syslog: bind() fd 4, family 10, port 123, addr ::, in6_is_addr_multicast=0 flags=0 fails: Address already in use addto_syslog: bind() fd 4, family 2, port 123, addr 127.0.0.1, in_classd=0 flags=0 fails: Address already in use addto_syslog: bind() fd 4, family 2, port 123, addr 10.31.32.5, in_classd=0 flags=8 fails: Address already in use init_io: maxactivefd 0 local_clock: time 0 clock 0.000000 offset 0.000000 freq 0.000 state 0 key_expire: at 0 peer_clear: at 0 assoc ID 55772 refid INIT newpeer: 10.31.32.5->10.31.33.9 mode 3 vers 4 poll 6 10 flags 0x281 0x1 ttl 0 key 00000000 key_expire: at 0 peer_clear: at 0 assoc ID 55773 refid INIT newpeer: 10.31.32.5->10.31.39.139 mode 3 vers 4 poll 6 10 flags 0x201 0x1 ttl 0 key 00000000 addto_syslog: frequency initialized 0.000 PPM from /var/lib/ntp/drift local_clock: time 0 clock 0.000000 offset 0.000000 freq 0.000 state 1 report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010) addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 1 10.31.32.5->10.31.33.9 mode 3 auth_agekeys: at 1 keys 1 expired 0 timer: refresh ts 0 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 2 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 3 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 4 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 5 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 6 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 7 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 8 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 9 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 10 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 11 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 12 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 13 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 14 10.31.32.5->10.31.39.139 mode 3 addto_syslog: sendto(10.31.33.9): Bad file descriptor transmit: at 15 10.31.32.5->10.31.33.9 mode 3 addto_syslog: sendto(10.31.39.139): Bad file descriptor transmit: at 16 10.31.32.5->10.31.39.139 mode 3 addto_syslog: no reply; clock not set Whant am I doing wrong? Thanks in advance and best regards M.A. _______________________________________________ questions mailing list [email protected] https://lists.ntp.org/mailman/listinfo/questions
