Hi, As per the ntpq output given, the initial offset is too high (in bold below).
ntpq> rv 12516 status=9014 reach, conf, 1 event, event_reach, srcadr=MAIL, srcport=123, dstadr=192.168.4.18, dstport=123, leap=00, stratum=2, precision=-6, rootdelay=31.250, rootdispersion=10932.175, refid=DC1, reach=377, unreach=0, hmode=3, pmode=4, hpoll=6, ppoll=6, flash=00 ok, keyid=0, ttl=0, *offset=3604309.724*, delay=0.240, dispersion=20.390, jitter=11.206, reftime=cb5bd42e.a7f3e6ed Tue, Feb 12 2008 11:45:42.656, org=cb5bd4bb.8004493a Tue, Feb 12 2008 11:48:03.500, rec=cb5bc6a7.2da250f8 Tue, Feb 12 2008 10:47:59.178, xmt=cb5bc6a7.2d8f605a Tue, Feb 12 2008 10:47:59.177, filtdelay= 0.29 0.32 0.28 0.33 0.29 0.29 0.34 0.24, filtoffset= 3604321 3604321 3604312 3604321 3604321 3604321 3604321 3604309, filtdisp= 15.63 16.60 17.59 18.58 19.57 20.53 21.49 22.45 Before starting 'ntpd' use 'ntpdate' at the clients to nullify this initial high offset. Then I hope it should work. Venu _______________________________________________ questions mailing list [email protected] https://lists.ntp.org/mailman/listinfo/questions
