David Lord wrote:
that I can't get parallel (or serial) pps to work with just ATOM driver flag3 0 | 1 (kernel discipline disable | enable) and no other refclock, ie I'd like to just use another ntp server as preferred with pps to condition the clock.
Don't know what I did wrong previously but just removed 127.127.20.0 lines from ntp.conf, set me6000g as prefer, restarted ntpd and had following: oPPS(0) .PPSb. 377 -0.002 0.004 pps from GPS *k6x400 377 0.246 +me6000g .PPSa. 377 0.106 pps from MSF -p4x2400c 377 0.533 The above with parallel pps0 at ppbus and /dev/pps0 created using mknod same as tried earlier. Also tried with p4x2400c as prefer and that's ok. Replaced /dev/pps0 with /dev/pps0 -> /dev/tty00 disconnected parallel port, reconnected serial (DCD and RxD), restarted ntpd and that's working ok. Can't think what I've done different. Then again MSF wouldn't sync end of last week after I'd made a change to ntp.conf and then I noticed LED on receiver wasn't flashing. David _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
