Hi,
I have a network of devices that will spend time both with and without a
reliable time source. I have designated one as a server. The ntp.conf
is,
pidfile /var/run/ntpd.pid
driftfile /var/db/ntp.drift
tos minsane 1 minclock 1
disable auth
tos orphan 10
server 10.0.1.20
manycastserver 224.1.1.1
The other devices have an ntp.conf file of,
pidfile /var/run/ntpd.pid
driftfile /var/db/ntp.drift
tos minsane 1 minclock 1
tos orphan 10
disable auth
manycastclient 224.1.1.1
Everything works fine when the external server is present. When I kill
ntp on the external server the device configured as a manycastserver
refuses to believe that 10.0.1.20 is no longer responding
$ ntpq -p
remote refid st t when poll reach delay offset
jitter
========================================================================
======
*10.0.1.20 LOCAL(0) 5 u 18h 256 0 0.206 -0.243
0.000
Is this normal, what do I need to do to get orphan mode to kick in.
Thanks,
Neil
Using NTP 4.2.4p7
The information contained in this e-mail message is PRIVATE. It may contain
confidential information and may be legally privileged. It is intended for the
exclusive use of the addressee(s). If you are not the intended recipient, you
are hereby notified that any dissemination, distribution or reproduction of
this communication is strictly prohibited. If the intended recipient(s) cannot
be reached or if a transmission problem has occurred, please notify the sender
immediately by return e-mail and destroy all copies of this message.
Thank you.
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
