In article <4be025aa.4050...@signaturealpha.com>, Marc Leclerc <marc-lecl...@signaturealpha.com> writes:
>I am trying to have NTP use the trimble resolution SMT gps module, I >have tried other trimble clock driver without success so I assume that >one specific to the module has to be used. Unfortunately there does not >seems to be any way to search the mailing list to see if this was >discuss before. I would appreciate if anyone with information could get >back to me. >I am trying to make this work on an embedded linux platform, I already >have the linuxpps driver installed and have the /dev/pps0 node >available. the module is wired to /dev/ttyS1. Using the clock driver for >the palisade lead to wrong answer format messages. The Palisade driver supports several different variations of Trimble products. Which one(s) did you try? The data sheet says it speaks TISP and NMEA. I don't know which one is the default. You might try running some helper code before starting ntpd to switch it to NMEA mode, and then telling ntpd that it's a NMEA device. -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions