Hi there. A quick question about what to expect when it comes to NTP failures. I configured a Meinberg NTP server (software-based server), had it working, serving time to the back-end hosts, Reachability at 377 for its two NTP upstream time sources (internet NTP servers). Once configured, I wanted to see how the server failed.
My expectation was that once Reachability went to zero, the server would stop serving time since it no longer has a source itself. So I blocked port 123 UDP/TCP at the firewall, and sure enough, Reachability for the two upstream sources slowly wound down from 377 to zero. However, once Reachability got to zero, the Meinberg NTP server CONTINUED to serve time, and CONTINUED to say that each of the two upstream servers were believable, as if it was still getting time from them (but it was not). I confirmed the drops at the firewall. The Reachability was at zero, so I know the Meinberg software was not getting NTP time from anywhere. Yet, it kept serving NTP time to its back-end hosts, and kept saying that ach of the two upstream servers were good (one colored green, the other yellow, with the * and the + signs next to them). After 5 hours of zero Reachability, nothing changed. So my question is: how long does it take before the Meinberg server declares itself in a "failed" state and stop serving NTP? Is that how it's supposed to work? I looked all over the Meinberg site and could not find any forum or literature regarding how the NTP server is expected to fail. Maybe Im missing a setting? Thanks for any help!!! :) Goofyzig _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
