In article <aanlktil2jbpj9p5eqfykgnjev8_ejr6ic_0cuodgf...@mail.gmail.com>, Marcelo Pimenta <marcelopiment...@gmail.com> writes:
>I thought that SNTP was used in a kind of "Intranet" with no routers and no >internet, so the low latency there is no need of so much calculations to >adjust the clock. I haven't been able to figure out what you are really trying to ask. The packets on the wire are the same for NTP and SNTP. The results you will get will depend upon the hardware and software you are using. If you have a good/reference server on your local LAN, it should be reasonable to get the clock on a client to within 1 ms most of the time. I would expect occasional quirks. How many would depend mostly on the software you are using. (If somebody is going to get hurt or killed if your clock is off by more than 1 ms, you should do something else.) You should probably setup a test bed and see how well it actually works. -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions