Hi all! I configured a Motorola Oncore UT+ unit on a FreeBSD machine using ntpd 4.2.6p3 (ONCORE and SHHMEM enabled during configuration). If any Oncore user could help me I would appreciate.
I am running with the following ntp.oncore.0 file oncore# cat /etc/ntp.oncore.0 MODE 2 SHMEM /etc/oncore.0 TRAIM YES DELAY 25 NS CLEAR MASK 0 and ntp.conf server 127.127.30.0 server ntp02.oal.ul.pt iburst noselect server ntp04.oal.ul.pt iburst noselect server router7.lisboa.fccn.pt iburst noselect server router15.porto.fccn.pt iburst noselect statistics loopstats statsdir /var/log/ntp/ filegen peerstats file peers type day link enable filegen loopstats file loops type day link enable filegen clockstats file clocks type day link enable Here's the startup information (from /var/log/ntp/clocks) 55810 28040.976 127.127.30.0 ONCORE[0]: ONCORE DRIVER -- CONFIGURING 55810 28040.976 127.127.30.0 ONCORE[0]: state = ONCORE_NO_IDEA 55810 28040.977 127.127.30.0 ONCORE[0]: ONCORE: incomplete data on /etc/ntp.oncore.0 55810 28040.977 127.127.30.0 ONCORE[0]: Input mode = 2 55810 28040.977 127.127.30.0 ONCORE[0]: Initializing timing to Clear. 55810 28040.978 127.127.30.0 ONCORE[0]: SHMEM (size = 3628) is CONFIGURED and available as /etc/oncore.0 55810 28040.978 127.127.30.0 ONCORE[0]: state = ONCORE_CHECK_ID 55810 28041.619 127.127.30.0 ONCORE[0]: @@Cj 55810 28041.619 127.127.30.0 ONCORE[0]: COPYRIGHT 1991-1997 MOTOROLA INC. 55810 28041.619 127.127.30.0 ONCORE[0]: SFTW P/N # 98-P36848P 55810 28041.619 127.127.30.0 ONCORE[0]: SOFTWARE VER # 2 55810 28041.619 127.127.30.0 ONCORE[0]: SOFTWARE REV # 2 55810 28041.620 127.127.30.0 ONCORE[0]: SOFTWARE DATE APR 24 1998 55810 28041.620 127.127.30.0 ONCORE[0]: MODEL # R5122U1152 55810 28041.620 127.127.30.0 ONCORE[0]: HWDR P/N # 5 55810 28041.620 127.127.30.0 ONCORE[0]: SERIAL # R08OTB 55810 28041.620 127.127.30.0 ONCORE[0]: MANUFACTUR DATE 0F10 55810 28041.620 127.127.30.0 ONCORE[0]: 55810 28041.620 127.127.30.0 ONCORE[0]: This looks like an Oncore UT with version 2.2 firmware. 55810 28041.620 127.127.30.0 ONCORE[0]: Channels = 8, TRAIM = ON 55810 28041.620 127.127.30.0 ONCORE[0]: state = ONCORE_CHECK_CHAN 55810 28046.165 127.127.30.0 ONCORE[0]: Input says chan = -1 55810 28046.165 127.127.30.0 ONCORE[0]: Model # says chan = 8 55810 28046.165 127.127.30.0 ONCORE[0]: Testing says chan = 8 55810 28046.165 127.127.30.0 ONCORE[0]: Using chan = 8 55810 28046.165 127.127.30.0 ONCORE[0]: state = ONCORE_HAVE_CHAN 55810 28047.617 127.127.30.0 ONCORE[0]: state = ONCORE_TEST_SENT 55810 28055.640 127.127.30.0 ONCORE[0]: GPS antenna: OK 55810 28055.640 127.127.30.0 ONCORE[0]: state = ONCORE_INIT 55810 28057.973 127.127.30.0 ONCORE[0]: Oncore: Resend @@Cj 55810 28058.553 127.127.30.0 ONCORE[0]: state = ONCORE_ALMANAC 55810 28061.039 127.127.30.0 ONCORE[0]: Cable delay is set to 25 ns 55810 28061.042 127.127.30.0 ONCORE[0]: Satellite mask angle set to 0 degrees 55810 28062.965 127.127.30.0 ONCORE[0]: Have now loaded an ALMANAC 55810 28062.965 127.127.30.0 ONCORE[0]: state = ONCORE_RUN 55810 28062.965 127.127.30.0 ONCORE[0]: SSstate = ONCORE_SS_TESTING 55810 28063.039 127.127.30.0 ONCORE[0]: ONCORE: Detected TRAIM, TRAIM = ON 55810 28063.039 127.127.30.0 ONCORE[0]: Input says TRAIM = 1 55810 28063.039 127.127.30.0 ONCORE[0]: Model # says TRAIM = 1 55810 28063.039 127.127.30.0 ONCORE[0]: Testing says TRAIM = 1 55810 28063.039 127.127.30.0 ONCORE[0]: Using TRAIM = 1 55810 28064.065 127.127.30.0 ONCORE[0]: Initiating hardware 3D site survey 55810 28064.065 127.127.30.0 ONCORE[0]: SSstate = ONCORE_SS_HW 55810 28064.072 127.127.30.0 ONCORE[0]: PPS Offset is set to 0 ns 55810 28064.099 127.127.30.0 ONCORE[0]: Satellite mask angle is 0 degrees 55810 28088.234 127.127.30.0 3524284088.000133044 2011 249 7 48 8 8 rstat 10 dop 4.4 nsat 10,4 traim 1,0,1 sigma 63 neg-sawtooth 18 sat 00850808 55810 28089.247 127.127.30.0 3524284089.000129588 2011 249 7 48 9 9 rstat 10 dop 4.4 nsat 10,4 traim 1,0,1 sigma 63 neg-sawtooth -20 sat 00850808 55810 28090.234 127.127.30.0 3524284090.000121930 2011 249 7 48 10 10 rstat 10 dop 4.4 nsat 10,4 traim 1,0,1 sigma 63 neg-sawtooth -37 sat 00550808 55810 28091.233 127.127.30.0 3524284091.000120534 2011 249 7 48 11 11 rstat 10 dop 4.4 nsat 10,4 traim 1,0,1 sigma 63 neg-sawtooth 49 sat 00550808 My questions 1. I thought that I would only get fixes after survey is done? The Oncore is surveying but it's passing clock information to ntp. Is this right? 2. When surveying finishes (ONCORE_SS_DONE) where can I get the surveyed position to save it to /etc/ntp.oncore.0? What is the best procedure? I don't want to survey every time I power up the unit... (the unit has no backup power) 3. At the moment, the unit is still disciplining my local clock oncore# ntpq -p -c rv -c as assID=0 status=0415 leap_none, sync_uhf_clock, 1 event, event_clock_reset, version="ntpd [email protected] Fri Sep 2 18:01:50 UTC 2011 (1)", processor="i386", system="FreeBSD/7.4-RELEASE-p2", leap=00, stratum=1, precision=-20, rootdelay=0.000, rootdisp=0.321, refid=GPS, reftime=d210780a.3b95ff4a Tue, Sep 6 2011 10:44:26.232, clock=d210780b.0616f2be Tue, Sep 6 2011 10:44:27.023, peer=6850, tc=4, mintc=3, offset=0.072, frequency=-28.078, sys_jitter=0.002, clk_jitter=0.001, clk_wander=0.001 ind assID status conf reach auth condition last_event cnt =========================================================== 1 6850 973a yes yes none pps.peer 3 2 6851 9024 yes yes none reject reachable 2 3 6852 9024 yes yes none reject reachable 2 4 6853 9024 yes yes none reject reachable 2 5 6854 9024 yes yes none reject reachable 2 remote refid st t when poll reach delay offset jitter ============================================================================== oGPS_ONCORE(0) .GPS. 0 l 1 16 377 0.000 0.072 0.002 ntp02.oal.ul.pt 194.117.9.129 2 u 37 64 377 10.639 1.352 0.157 ntp04.oal.ul.pt 194.117.9.138 2 u 24 64 377 10.274 2.072 0.150 Router7.Lisboa. 193.136.250.246 2 u 50 64 377 8.157 0.617 0.336 Router15.Porto. 193.136.250.246 2 u 39 64 377 12.748 0.876 0.130 Is this a good result? If anyone could help me I would really appreciate. Thanks! Cheers, Miguel _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
