Hello,
Why do the nmea and pps drivers differ regarding the default for
flag2? How would a user know which is appropriate?
PPS(22):
flag2 0 | 1
Specifies PPS capture on the rising (assert) pulse edge if 0; falling (clear)
edge if 1. (default), 1 for clear.
NMEA(20):
flag2 0 | 1
If PPS signal processing is enabled, capture the pulse on the rising edge if 0
(default); capture on the falling edge if 1.
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
