Good, GPS working with ntpd in survey mode: 55963 19230.746 127.127.20.0 $GPRMC,052033,A,3345.8222,S,15105.5291,E,000.0,289.1,060212,012.8,E*66 55963 19247.246 127.127.20.0 $GPGGA,052050,3345.8223,S,15105.5289,E,1,08,02.23,000090.8,M,0020.5,M,, 55963 19263.246 127.127.20.0 $GPGGA,052106,3345.8217,S,15105.5271,E,1,08,02.23,000089.5,M,0020.5,M,, 55963 19279.246 127.127.20.0 $GPGGA,052122,3345.8218,S,15105.5275,E,1,08,02.23,000089.3,M,0020.5,M,, 55963 19295.246 127.127.20.0 $GPGGA,052138,3345.8226,S,15105.5297,E,1,08,02.23,000089.3,M,0020.5,M,, 55963 19311.246 127.127.20.0 $GPGGA,052154,3345.8238,S,15105.5298,E,1,08,02.23,000090.1,M,0020.5,M,, 55963 19327.246 127.127.20.0 $GPGGA,052210,3345.8234,S,15105.5279,E,1,08,02.23,000089.8,M,0020.5,M,, 55963 19343.246 127.127.20.0 $GPGGA,052226,3345.8241,S,15105.5282,E,1,08,02.23,000088.8,M,0020.5,M,,
Bad, GPS not working with NTPD when set to timing mode: 55963 19834.312 127.127.20.0 $GPGGA,053037,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19846.818 127.127.20.0 $GPGGA,053047,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19862.818 127.127.20.0 $GPGGA,053103,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19878.818 127.127.20.0 $GPGGA,053119,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19894.818 127.127.20.0 $GPGGA,053135,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19910.818 127.127.20.0 $GPGGA,053151,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19926.818 127.127.20.0 $GPGGA,053207,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19942.818 127.127.20.0 $GPGGA,053223,3345.8218,S,15105.5278,E,0,07,00.38,000090.0,M,0020.5,M,, 55963 19958.818 127.127.20.0 $GPGGA,053239,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19974.818 127.127.20.0 $GPGGA,053255,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, 55963 19990.818 127.127.20.0 $GPGGA,053311,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,, Good, GPS working with ntpd in survey mode: ntpq> rv 23560 associd=23560 status=965a conf, reach, sel_sys.peer, 5 events, sys_peer, srcadr=GPS_NMEA(0), srcport=123, dstadr=127.0.0.1, dstport=123, leap=00, stratum=0, precision=-9, rootdelay=0.000, rootdisp=0.000, refid=GPS, reftime=d2d9e2be.fa22ad64 Mon, Feb 6 2012 16:25:18.977, rec=d2d9e2bf.3f03e586 Mon, Feb 6 2012 16:25:19.246, reach=377, unreach=0, hmode=3, pmode=4, hpoll=4, ppoll=4, headway=0, flash=00 ok, keyid=0, ttl=0, offset=2497.962, delay=0.000, dispersion=0.238, jitter=0.542, filtdelay= 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00, filtoffset= 2497.96 2498.08 2498.17 2498.28 2498.50 2498.59 2498.68 2498.79, filtdisp= 0.01 0.25 0.49 0.73 0.97 1.21 1.45 1.69 Bad, GPS not working with NTPD when set to timing mode: ntpq> rv 43305 associd=43305 status=8011 conf, sel_reject, 1 event, mobilize,srcadr=GPS_NMEA(0), srcport=123, dstadr=127.0.0.1, dstport=123, leap=11, stratum=0, precision=-9, rootdelay=0.000, rootdisp=0.000, refid=GPS, reftime=00000000.00000000 Thu, Feb 7 2036 17:28:16.000, rec=00000000.00000000 Thu, Feb 7 2036 17:28:16.000, reach=000, unreach=0, hmode=3, pmode=4, hpoll=4, ppoll=4, headway=0, flash=1200 peer_stratum, peer_unreach, keyid=0, ttl=0, offset=0.000, delay=0.000, dispersion=15937.500, jitter=0.000, filtdelay= 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00, filtoffset= 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00, filtdisp= 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 Good, GPS working with ntpd in survey mode: ntpq> cv 23560 associd=23560 status=0000 , no events, clk_unspec, device="NMEA GPS Clock", timecode="$GPGGA,052557,3345.8224,S,15105.5288,E,1,08,02.22,000089.0,M,0020.5,M,,", poll=21, noreply=0, badformat=0, baddata=0, fudgetime1=0.000, stratum=0, refid=GPS, flags=1 Bad, GPS not working with NTPD when set to timing mode: ntpq> cv 43305 associd=43305 status=0000 , no events, clk_unspec, device="NMEA GPS Clock", timecode="$GPGGA,054142,3345.8218,S,15105.5278,E,0,08,00.35,000090.0,M,0020.5,M,,", poll=42, noreply=0, badformat=0, baddata=0, fudgetime1=0.000, stratum=0, refid=GPS, flags=1 Footnote: To further complicate matters, I wired up a tee cable and sent the NMEA to another NTP server here running windows NTPD 4.2.7p238-o. NMEA works fine on that server in either mode. Is the only difference the nmea gga fix word? Many thanks, Mark -----Original Message----- From: Dave Hart [mailto:[email protected]] Sent: Monday, 6 February 2012 6:48 AM To: Mark C. Stephens Cc: [email protected] Subject: Re: [ntp:questions] timing issue with a HP 58534A On Sun, Feb 5, 2012 at 19:23, Mark C. Stephens <[email protected]> wrote: > After capturing data and computing average position for location for a > few days I put it into timing mode and locked the co-ords in. > > Now the refclock driver says its unreachable, even though I can see > (looks like) valid data ticking in with -d. > > I have switched the GPS back to survey mode and all is good again, > looks like I can't use timing mode with this driver. I'm curious what's going wrong when you have the HP GPS in timing mode. While it's possible using -d (or -dd, or -ddd, or equivalently -D2 or -D3) might be needed to isolate the cause, it's likely poking with ntpq will reveal all the information needed, using: ntpq -c "rv &1" and/or ntpq -c "cv &1" which display the generic peer variables and/or refclock-specific variables for the first peer/association. If you haven't already, enable clockstats (such as with "statistics loopstats clockstats" in ntp.conf) so the actual timecode received is logged, and do so _before_ switching back to position-locked timing mode. Perhaps the difference that triggers the problem will become obvious. Cheers, Dave Hart _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
