ntpd - NTP daemon program - Ver. 4.2.6p5
/var/log/messages
Feb 7 04:37:48 NTP ntpd[1033]: ntpd [email protected] Thu Feb 2 12:33:31 UTC
2012 (1)
Feb 7 04:37:48 NTP ntpd[1033]: logging to file /var/log/ntpd
/var/log/ntpd
7 Feb 04:37:48 ntpd[1034]: 0.0.0.0 c016 06 restart
7 Feb 04:37:48 ntpd[1034]: 0.0.0.0 c012 02 freq_set kernel 119.790 PPM
7 Feb 04:37:48 ntpd[1096]: logging to file /var/log/ntpd
7 Feb 04:37:49 ntpd[1034]: GPS_NMEA(0) 802b 8b clock_event clk_no_reply
7 Feb 04:37:54 ntpd[1034]: Listen normally on 5 em0 192.168.5.112 UDP 123
7 Feb 04:37:54 ntpd[1034]: peers refreshed
7 Feb 04:37:54 ntpd[1034]: new interface(s) found: waking up resolver
7 Feb 04:38:01 ntpd[1034]: 192.168.5.8 8024 84 reachable
7 Feb 04:38:03 ntpd[1034]: 0.0.0.0 c615 05 clock_sync
7 Feb 04:38:05 ntpd[1034]: GPS_NMEA(0) 8034 84 reachable
7 Feb 04:38:53 ntpd[1034]: GPS_NMEA(0) 904a 8a sys_peer
[root@NTP ~]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*GPS_NMEA(0) .GPS. 0 l 1 16 377 0.000 -0.667 0.060
+time.non-stop.c .GPS. 1 u 25 64 377 0.390 5.796 8.888
[root@NTP ~]# cat /etc/ntp.conf
#
keys /etc/ntp/keys
trustedkey <removed>
requestkey <removed>
controlkey <removed>
saveconfigdir /etc/ntpd
# GPS NMEA
server 127.127.20.0 mode 24 minpoll 4 maxpoll 4
fudge 127.127.20.0 flag1 1 time2 -0.48
# GPS PPS
#server 127.127.22.0 minpoll 4 maxpoll 4
#fudge 127.127.22.0 time1 0.525 flag3 1
#Inhouse
peer 192.168.5.8 iburst
# others
<removed>
<removed>
<removed>
<removed>
logconfig =allall
driftfile /var/db/ntpd.drift
enable stats
statsdir /var/ntp
statistics loopstats peerstats clockstats
[root@NTP ~]# ntpdc -c kerninfo
pll offset: 3.243e-05 s
pll frequency: 106.791 ppm
maximum error: 0.011957 s
estimated error: 8.8e-05 s
status: 2001 pll nano
pll time constant: 4
precision: 1e-09 s
frequency tolerance: 496 ppm
pps frequency: 119.790 ppm
pps stability: 0.000 ppm
pps jitter: 0 s
calibration interval: 4 s
calibration cycles: 0
jitter exceeded: 0
stability exceeded: 0
calibration errors: 0
AFAIK I have done everything exactly as my friend Google said, Any other
information that can assist us to track down the issue?
Many thanks,
Mark
-----Original Message-----
From: Dave Hart [mailto:[email protected]]
Sent: Tuesday, 7 February 2012 1:02 AM
To: Mark C. Stephens
Cc: [email protected]
Subject: Re: [ntp:questions] timing issue with a HP 58534A
On Mon, Feb 6, 2012 at 13:50, Mark C. Stephens <[email protected]> wrote:
> This is probably the wrong question to ask, but anyway, I have flag1 1 for
> refclock 20 in my config.
>
> Under freebsd how do I verify it is using PPS timestamps?
On any platform, with flag1 1 for the NMEA driver, PPSAPI is attempted. If it
fails, you will see the driver whinge to syslog. If it succeeds and PPS is
working, you'll see 'o' tally code in the first column of ntpq -p output (PPS
peer) rather than '*' (system peer).
With flag3 1 (kernel hardpps, that is, kernel sync directly to PPS without ntpd
involvement) you can check for PPS indicated in one of several similar outputs:
ntpdc -c kerninfo
ntpq -c kerninfo (requires recent 4.2.7 ntpq and ntpd) ntptime
Cheers,
Dave Hart
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
