On 01/08/2012 10:15, Terje Mathisen wrote:
[]
This summer I received two more SURE boards, it took about an hour total
to solder on the two required patch wires on each of them.
(I used David's pictures to remind me where to put the patch wires!)
Together with a pair of old laptops (with proper serial ports) this
gives me another set of Stratum1 servers, for a total outlay of less
than $100.
I've seen reports here that one of the timing nuts have measured the
SURE board as giving a PPS signal that's in the 25-50 ns range?
According to the loopstats files my laptop is mostly in the 3-500 ns
range, with excursions up to a us or two, obviously due to interrupt
response time jitter and temperature variations.
Terje
Tom Van Baak's page reports RMS error of 22 nanoseconds.
http://www.leapsecond.com/pages/MG1613S/
and is well worth reading in any case!
--
Cheers,
David
Web: http://www.satsignal.eu
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
