Hahn, Ron wrote:
Colleagues,
I am putting together some Motorola Oncore UT+ boards to replace my Sure boards in my ntp servers. I am using this http://www.tapr.org/gps_vpib.html board as the templat for the interface circuits. The circuit calls for a BR2325 battery which I cannot find in the local parts store. Is there a person on this list with experiences of this board design that can tell me what I can substitute for this part? Or maybe it is not necessary? I am not even sure if the battery is necessary but from my experiences the boards go from a cold start whenever power is interrupting. One of my servers is part of the ntp pool so I am needing the rapid recovery if the power is interrupted. My systems are on the UPS so maybe this battery is not required?
Thanks for the helping hands,
Ron
in UK they're listed by both Farnell and Electrocomponents both
having overseas branches.
# BATTERY, LITHIUM, BR2325 165MAH
# Battery Size Code: 2325
# Battery Capacity: 165mAh
# Battery Voltage: 3V
# Battery Technology: Lithium Polymer
# Battery Terminals: Pressure Contact
# External Diameter: 23mm
# External Height: 2.5mm
# External Width: 23mm
# External Depth: 2.5mm
# Weight: 3.2g
# Body Diameter: 23mm
# Depth: 2.5mm
# External Length / Height: 2.5mm
# Operating Temperature Max: 80°C
# Operating Temperature Min: -30°C
# Output Voltage: 3V
# Pack Quantity: 1
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
