David Taylor <[email protected]> wrote: > First problem with gpsd resolved, I needed a "-n" on the command-line! > > Next step is to see how the time a GPIO pin is triggered can be written > into the SHM memory block, or whatever....
gpsd writes the time into the SHM block. you need a serial port with data and DCD, and connect the pulse per second output of the trimble to the DCD. when that works you will have two SHM blocks, one with the time from the serial messages and another with the time from the PPS. _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
