Hi Guys:
now, I need to configure ntp server and client in a private network
environment, supposed that:
|------ client D
Server A |------ client E
Server B | ------ client F
|------ clientG
servers and clients are all linux physical machine.
I want those clients is synchonized to Server A or Server B ,
Both A and B are using Local clock in their mainboard , without extra refer
clock source.
why use two Servers ? I want to implemet ntp server HA :when A became down,
clients can be synchonized to B .
A’s ip : 192.168.1.10
B’s ip : 192.168.1.20
So I configure ntp.conf
on A :
server 127.127.1.0
fudge 127.127.1.0 stratum 11
on B:
server 127.127.1.0
fudge 127.127.1.0 stratum 11
on all clients , such as D:
server 192.168.1.10
server 192.168.1.20
but I “ntpq �Cp” on D :
remote refid st t when poll reach
delay offset jitter
==============================================================================
x192.168.227.142 LOCAL(0) 11 u 2 64 377 0.274
61.575 24.412
x192.168.227.148 LOCAL(0) 11 u 39 64 377 0.187 1820.54
23.696
My expect is that : there is at least a asterisk “*” in two line, now both
is “x” ,
My question:
1.I think client can’t be sysynchonized to Server A or Server B, this
opinion Is right ?
2.If want to appear asterisk , how will I do ?
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
