[email protected] wrote:
I have 2 GPS receiver, which I want to use for the ntp server.
1. Trimble Lassen IQ
2. Navia ML8088s
First I was able to set up to work with
It has the format
$GPRMC,154024.00,A,4853.7462,N,02652.2962,E,000.3,318.9,060813,03.9,E,A*04(two
zeros after the point in time field)
And the second one does not work
It has the format
$GPRMC,154024.000,A,4853.7462,N,02652.2962,E,000.3,318.9,060813,03.9,E,A*04(three
zeros after the point in time field)
How to configure the Meinberg ntp server software so that it viewed the
following format
I'm assuming you are refering to the NTP package for Windows which is
available via the Meinberg web site.
Please note this is the standard NTP software from ntp.org which we at
Meinberg have just compiled and put into a GUI setup program to simplify
installation under Windows.
Unfortunately I've never used ntpd with an NMEA string, so I can't be of
further help, but there are some folks here who have done this, even
under Windows.
Maybe David J. Taylor's web pages provide some help:
http://www.satsignal.eu/ntp/NTP-on-Windows-serial-port.html
Martin
--
Martin Burnicki
Meinberg Funkuhren
Bad Pyrmont
Germany
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
