On Wed, 08 Jan 2014 01:46:55 +0000, William Unruh wrote: > On 2014-01-07, Dennis Golden <[email protected]> wrote: >> I have searched to find an answer to this problem with no success. I am >> using the oncore clock (127.127.30.0) and have included "enable pps" in >> ntp.conf, but I get the following in /var/log messages: >> >> line 59 column 8 syntax error, unexpected T_String syntax error in >> /etc/ntp.conf line 59, column 8 >> >> I can use ntpdc to set this option with no problem. > > So why don't you cut and paste your ntp.conf file here, or at least cut > and past line 59. Whe really cannot guess what they say. > >
<snip> line 59 was in quotes in the initial post Here it is: ==Start== ################################################################################ ## /etc/ntp.conf ## ## Sample NTP configuration file. ## See package 'xntp-doc' for documentation, Mini-HOWTO and FAQ. ## Copyright (c) 1998 S.u.S.E. GmbH Fuerth, Germany. ## ## Author: Michael Andres, <[email protected]> ## ################################################################################ ## ## Radio and modem clocks by convention have addresses in the ## form 127.127.t.u, where t is the clock type and u is a unit ## number in the range 0-3. ## ## Most of these clocks require support in the form of a ## serial port or special bus peripheral. The particular ## device is normally specified by adding a soft link ## /dev/device-u to the particular hardware device involved, ## where u correspond to the unit number above. ## ## Generic DCF77 clock on serial port (Conrad DCF77) ## Address: 127.127.8.u ## Serial Port: /dev/refclock-u ## ## (create soft link /dev/refclock-0 to the particular ttyS?) ## # server 127.127.8.0 mode 5 prefer server 127.127.30.0 #server 127.127.20.0 mode 2 prefer #fudge 127.127.20.0 flag1 1 flag2 0 flag3 1 time1 0.0 #fudge 127.127.20.0 time2 0.22 ## ## Undisciplined Local Clock. This is a fake driver intended for backup ## and when no outside source of synchronized time is available. ## server 127.127.1.0 # local clock (LCL) fudge 127.127.1.0 stratum 10 # LCL is unsynchronized ## ## Outside source of synchronized time ## peer 192.168.1.2 # Local network peer # External puplic access servers # server time.nist.gov # NCAR Boulder, Colorado server ntppub.tamu.edu # Texas A&M server nist.time.nosc.us # NIST Carrollton, Texas server navobs1.wustl.edu # Washington University, St. Louis, Missouri server ntp-1.ece.cmu.edu # Carnegie Mellon Electrical and Computer Engineering server ntp.tmc.edu # Baylor College of Medicine, Houston, TX ## ## Miscellaneous stuff ## enable pps driftfile /var/lib/ntp/drift/ntp.drift # path for drift file logfile /var/log/ntp # alternate log file # logconfig =syncstatus + sysevents logconfig =all statsdir /var/lib/ntp/tmp/ # directory for statistics files filegen peerstats file peerstats type day enable filegen loopstats file loopstats type day enable filegen clockstats file clockstats type day enable # # Authentication stuff # keys /etc/ntp.keys # path for keys file trustedkey 1 2 3 4 5 6 14 15 # define trusted keys requestkey 15 # key (7) for accessing server variables controlkey 15 # key (6) for accessing server variables # # Access Control # restrict default noquery nomodify notrap nopeer # IPv4 restrict -6 default noquery nomodify notrap nopeer # IPv6 restrict 192.168.1.0 # allow local domain restrict 127.0.0.1 # allow local host ==end== I'm using 4.2.6p5. TIA, Dennis -- Dennis Golden Golden Consulting Services Change 'invalid' to 'com' to reply by email. _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
