Dennis Golden wrote:
I have searched to find an answer to this problem with no success. I am
using the oncore clock (127.127.30.0) and have included "enable pps" in
ntp.conf, but I get the following in /var/log messages:
line 59 column 8 syntax error, unexpected T_String
syntax error in /etc/ntp.conf line 59, column 8
I can use ntpdc to set this option with no problem.
Hi
I have an oncore??? that I've never tried.
My sources for ntp-dev-4.2.7p401 don't seem to have any code
for oncore.pps.n whilst it is present in 4.2.6p5.
My couple of suggestions are:
(1) symlink from the serial port device to /dev/oncore.pps.n
(2) try the Atom + nmea drivers as alternative
The oncore driver seems to allow a selectable skew so that
several pps devices can run at the same time so you'd lose
that functionality.
David
Any ideas?
TIA,
Dennis
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
