gooly wrote:
Hi,
I just installed ntp on my Win 7 pc where it runs perfectly the
difference is around 0,5 sec.
Then I installed ntp on my 2008 R 2vps where the delay gets bigger and
bigger, around 12 sec per 30 min ??
For both installations I used more or less the default suggestion of ntp.
Is anybody here who can tell me what's going wrong?
What I can do instead of restating ntp again and again as after a
restart the delay is practically 0?
Here is an example the delay to ts1.aco.net but I was using
ptbtime3.ptb.de before that and had the same results:
16:29:07 avg. delay: 1,60 prv: 0,00 next check: 16:54:21
16:54:29 avg. delay: 12,99 prv: 1,60 next check: 17:24:21
17:24:30 avg. delay: 25,20 prv: 12,99 next check: 17:54:21
17:54:29 avg. delay: 39,52 prv: 25,20 next check: 18:24:21
I first tried the the ntp suggestion to create the ntp-user to run ntp.
Now I re-installed ntp to define the Win.-User SYSTEM (no good as ntp
says) to run ntp but the result hasn't changed at all.
My time-check uses one of the ntp-server for ntp.
If I (re-) start ntp the delay is immediately practically 0 and as of
then the vps-clock creeps on..
You need to replace the NTP binaries by a newer version which contains
another workaround for a limitation on current Windows versions, and you
should use
server a.b.c.d iburst minpoll 6 maxpoll 6
to get the most accurate results. For details please see
http://lists.ntp.org/pipermail/questions/2014-June/038285.html
Martin
--
Martin Burnicki
Meinberg Funkuhren
Bad Pyrmont
Germany
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
