On Sun, Feb 15, 2015 at 10:40:11PM +0000, Rob wrote:
> However, it does not reply to NTP requests from other systems with ntpd.
> (I can confirm that in a network trace)

> Is there a magic command that has to be in the config to make it work
> as a server?

No, your configuration looks good. Any chance there is a forgotten
firewall rule blocking NTP or that clients are actually using IPv6?

Is chronyd listening on the port?

# netstat -a -n -p | grep 123
udp        0      0 0.0.0.0:123             0.0.0.0:*                           
29615/chronyd       
udp6       0      0 :::123                  :::*                                
29615/chronyd       

> Configuration:
> 
> driftfile               /var/lib/ntp/ntp.drift
> logdir                  /var/log/ntpstats
> log                     statistics measurements tracking tempcomp
> local stratum           10
> makestep                10 3
> refclock                PPS /dev/pps0
> server 192.168.42.1     iburst
> server 192.168.42.60    iburst
> server 192.168.42.61    iburst
> allow                   0/0
> cmdallow                192.168.42.0/24

-- 
Miroslav Lichvar
_______________________________________________
questions mailing list
questions@lists.ntp.org
http://lists.ntp.org/listinfo/questions

Reply via email to