Hi everyone,
I have also one Q about sysex - can i transfer bulk data to normal midi?
E. g. my Yamaha can transfer sonngs from internal sequencer via sysex,
QWS recorded it, but how to convert it to normal midi? i can not play
these songs and record to multychannel because my keyboard don't send
anything during playback.
Recording in QWS is great and usefull but in some situations i need to
record something quickly without configuring the computer, etc.
thanks
Ondrej
Dňa 9. 7. 2011 2:56, James Bowden wrote / napísal(a):
Hello Arne,
I have just checked out recording from multiple simultaneous sources
in QWS and it works.
I even recorded a sysex.
I recall someone suggested getting a MIDI monitor program to check
what your keyboard is actually sending. Did you manage to do this?
What were the results?
Hope this helps.
James.
----- Original Message ----- From: "Arne" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Friday, July 08, 2011 8:15 PM
Subject: Re: QWS List Recording incoming SysEx Messages
Hello all,
thanks for your suggestions, but I could not solve the problem.
QWS cannot record multiple channels or ports at once, maybe that is
the reson. The patch in question is a layered detuned organ, so on
Channel1 I have one organ left and on Channel2 the other one right,
both are detuned. The patch information from MIDI bulk dump and from
panel settings does not have any effect on the settings, but the
patch changing buttons can set the layer-organ patch. This is only
possible in live recording, and it is not possible to change
parameters afterwards. What is more, and I cannot find out any
details about it, there are 2 MIDI-out ports for my P-250. What I
will do is to ask someone to read out the MIDI settings of the P-250
to me in case there is some wrong setting though I set everything to
default and sending/receiving of all data should be possible.
What can I do to make QWS record from multiple MIDI-channels at once,
even if the track is already recorded and should get another set of
layer?
In fact, I just want to play my P-250 with some patch changes, so I
want to record both what I play and the special settings of layers
and voices - and of course after all, I'm still most impatient to do
that :).
Best regards,
Arne
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-archive.com/[email protected]
