Thanks Barry,
I considered rebuilding it, but when I cut it open, appeared that the
components were potted in Asbestos? Anyway, discretion being the better part....
Frank
KJ4OLL
On Sunday, June 23, 2024 at 04:34:21 PM EDT, Barry Scott
<[email protected]> wrote:
Looks good. Mine failed a couple of years ago and I rebuilt it. It wasn't
fun but it can be done.
Thanks,Barry - N4BUQ
On Sat, Jun 22, 2024 at 1:09 PM Frank Hughes via R-390 <[email protected]>
wrote:
An R-390 I picked up years ago at a local Hamfest stopped powering up.
Traced the issue to the SPRAGUE AC line filter.
Replacing it w/ a CORCOM 3EQ1, which fits in the space where the original
filter was installed.
I recovered the original 4-pin male R-390 power connector from the SPRAGUE
filter,
so that the original power cord and appearance can be maintained.
73
Frank
KJ4OLL
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
