It occurred to me that I didn't notify the list that I found a dozen #3-56 x 3/16" stainless steel pan-head screws on eBay and got those a few weeks ago so I'm good on this. Renée emailed me just this morning stating he had found his stash so I thought I should post something to the list in case anyone else was still going to look for them.
Thanks again, Barry - N4BUQ Send me your address I will send you some … Tom, N3LLL > On Mon, Oct 3, 2022 at 12:15 AM Barry < [ mailto:[email protected] | > [email protected] ] > wrote: >> Unfortunately, I don't have an ARC-5. I'll have to keep looking. Not a big >> deal, >> but would like to plug that hole. >> Thanks, >> Barry - N4BUQ >> > From: "Renee K6FSB" < [ mailto:[email protected] | [email protected] ] > >>> To: "n4buq" < [ mailto:[email protected] | [email protected] ] >, "thoyer" >>> < [ >> > mailto:[email protected] | [email protected] ] > >>> Cc: "R-390 Mailing List" < [ mailto:[email protected] | >> > [email protected] ] > >> > Sent: Sunday, October 2, 2022 9:50:51 PM >> > Subject: Re: [R-390] Name Plate Screw Size? >> > #3 you mean a 3-48? those were on the ARC-5 stuff IIRC >> > Renée >> > On 10/2/22 4:13 PM, Barry wrote: >> >> I figured #3s were an odd size. Likely someone modified the panel and I >> >> think >> >> finding another #3 screw won't be easy. >> >> Thanks, >> >> Barry - N4BUQ >> >> ----- Original Message ----- >>>>> From: "thoyer" [ mailto: [ mailto:[email protected] | >>>>> [email protected] ] | >> >>> < [ mailto:[email protected] | [email protected] ] > ] To: >>>>> "n4buq" [ mailto: [ mailto:[email protected] | [email protected] ] | < [ >> >>> mailto:[email protected] | [email protected] ] > ] , "R-390 Mailing >>>>> List" [ mailto: [ mailto:[email protected] | [email protected] ] >>>>> | < [ >> >>> mailto:[email protected] | [email protected] ] > ] Sent: Sunday, >> >>> October 2, 2022 6:03:52 PM >> >>> Subject: RE: [R-390] Name Plate Screw Size? >> >>> The screws on both of my R390's are 2-56. >> >>> Tom >> >>> W3TA >> >>> -----Original Message----- >>>>> From: [ mailto: [ mailto:[email protected] | >>>>> [email protected] ] | [ mailto:[email protected] | >> >>> [email protected] ] ] [ >>>>> [ mailto: [ mailto:[email protected] | >>>>> [email protected] >>>>> ] | mailto: [ mailto:[email protected] | >> >>> [email protected] ] ] >> >>> ] >> >>> On Behalf Of Barry >> >>> Sent: Sunday, October 02, 2022 4:21 PM >> >>> To: R-390 Mailing List >> >>> Subject: [R-390] Name Plate Screw Size? >> >>> I have an R390 that's missing one of the screws that holds the nameplate >> >>> to >> >>> the front panel. I'm pretty sure the size for the R390A is #2-56; >> >>> however, >> >>> this is an R390 and appears to have #3 screws (measures about 0.097" >> >>> diameter). Does anyone know whether the R390 used #3 sizes for the >> >>> nameplate or, possibly, has someone tapped the holes just a bit larger >> >>> in my >> >>> front panel to accommodate #3 screws? >> >>> In any case, I suppose I'm going to need a #3 to fill that hole. Not sure >> >>> if the local store where I've bought lots of small stainless-steel >> >>> pan-head >> >>> machine screws will have #3 but I can check. >> >>> Thanks, >> >>> Barry - N4BUQ >> >>> ______________________________________________________________ >> >>> R-390 mailing list >>>>> Home: [ [ http://mailman.qth.net/mailman/listinfo/r-390 | >> >>> http://mailman.qth.net/mailman/listinfo/r-390 ] | >>>>> [ http://mailman.qth.net/mailman/listinfo/r-390 | >> >>> http://mailman.qth.net/mailman/listinfo/r-390 ] ] Help: [ >>>>> [ http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] | >>>>> [ >> >>> http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] ] >> >>> Post: [ >>>>> mailto: [ mailto:[email protected] | [email protected] ] | >>>>> mailto: [ >> >>> mailto:[email protected] | [email protected] ] ] This list hosted >>>>> by: [ [ http://www.qsl.net/ | http://www.qsl.net/ ] | [ >>>>> http://www.qsl.net/ | >> >>> http://www.qsl.net ] ] Please help support this email >>>>> list: [ [ http://www.qsl.net/donate.html | http://www.qsl.net/donate.html >>>>> ] | [ >> >>> http://www.qsl.net/donate.html | http://www.qsl.net/donate.html ] ] >> >> ______________________________________________________________ >> >> R-390 mailing list >>>> Home: [ [ http://mailman.qth.net/mailman/listinfo/r-390 | >> >> http://mailman.qth.net/mailman/listinfo/r-390 ] | >>>> [ http://mailman.qth.net/mailman/listinfo/r-390 | >> >> http://mailman.qth.net/mailman/listinfo/r-390 ] ] Help: [ >>>> [ http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] | [ >> >> http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] ] >> >> Post: [ >>>> mailto: [ mailto:[email protected] | [email protected] ] | mailto: >>>> [ >> >> mailto:[email protected] | [email protected] ] ] This list hosted >>>> by: [ [ http://www.qsl.net/ | http://www.qsl.net/ ] | [ >>>> http://www.qsl.net/ | >> >> http://www.qsl.net ] ] Please help support this email >>>> list: [ [ http://www.qsl.net/donate.html | http://www.qsl.net/donate.html >>>> ] | [ >> >> http://www.qsl.net/donate.html | http://www.qsl.net/donate.html ] ] >> ______________________________________________________________ >> R-390 mailing list >> Home: [ http://mailman.qth.net/mailman/listinfo/r-390 | >> http://mailman.qth.net/mailman/listinfo/r-390 ] >> Help: [ http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] >> Post: mailto: [ mailto:[email protected] | [email protected] ] >> This list hosted by: [ http://www.qsl.net/ | http://www.qsl.net ] >> Please help support this email list: [ http://www.qsl.net/donate.html | >> http://www.qsl.net/donate.html ] ______________________________________________________________ R-390 mailing list Home: http://mailman.qth.net/mailman/listinfo/r-390 Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
