I've restarted working on the R-390. Hopefully I'll have the knobs repainted successfully soon but, in the meantime, I'm going back to the rest of the radio.
When I started the front panel restoration project, in anticipation of removing the RF deck for cleaning, I installed the Green Gear in the position where it engages the gears (as opposed to where it's normally held for safe-keeping). In the interim, I'd forgotten I had moved it and have rotated both the KC and MC shafts. Now I'm not sure what that might have done to the gear/cam alignments. I thought that with the gear installed that way, it would lock any movement on those shafts but apparently that's not true. If I remove that gear now without placing the KC and MC gearing back to the positions where they were when I installed the Green Gear, does that leave the cams improperly aligned? If not, I can realign them but was hoping to avoid that if it isn't necessary. Thanks, Barry - N4BUQ ______________________________________________________________ R-390 mailing list Home: http://mailman.qth.net/mailman/listinfo/r-390 Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
