List, It is easy to miss the detail that was put into the 26Z5 rectifier. It was designed with indirect heated cathodes. This makes for an easier startup on the PS. In most of the old B/A's they were equipped with 5V4's and similar large tubes having a cathode filament cons5ruction. Besides being big the y caused major problems with early R388's where the rectifier tube was next to the power transformer causing the insulating tar to melt out and ruin the transformer. Later Collins put a "Z" shaped shield or on some an added straight plate for heat protection. Circa mid-50's or so Mullard in England developed what I believe they called IIRC the GZ53, It is and indirectly heated cathode tube about the size of a 5Y3 and capable of powering all B/A's using the old 5XX series. I've had one in my 18W per channel stereo amp for years and years and it works like a champ. Now the audiophools have repro's from a bunch of venders for astronomical prices. The good news is a ham tube seller on line sells soviet reproductions 5AR4 for $10. The Russians make GOOD and inexpensive tubes. The problem with the 6BA6 sized tubes is the pin configuration doesn't match what we have. The smaller size allows for much better cooling as well as space saving. Perry KM6FQV
| | Virus-free.www.avast.com | ______________________________________________________________ R-390 mailing list Home: http://mailman.qth.net/mailman/listinfo/r-390 Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
