On Aug 26, 2009, at 6:47 , pleyd...@supagro.inra.fr wrote:
You're confusing rhome and arch - the above makes no sense. Let
rhome alone and you should be fine. (And make sure you're not
building in the source tree - you should be using something like
mkdir obj_vg0 && cd obj_vg0 && ../R-2.9.1/configure ...)
Thanks Simon. I'd already tried various variations with rhome and
arch, but I
think my biggest error was that I was always compiling from within
the source
tree. However, the following script still doesn't quite do the job
cd /usr/local/lib
mkdir R-2.9.2_vg0
mkdir R-2.9.2_vg1
mkdir R-2.9.2_vg2
cd /usr/local/lib/R-2.9.2_vg2
sudo /usr/local/src/R-2.9.2/configure --enable-memory-profiling
--with-valgrind-instrumentation=2 r_arch=vg2
^^-- this is really bad form - you should never build/compile software
as root. The location of the build directory is irrelevant so use /tmp
or you home or something like that ... (usualy the fastest disk ;))
sudo make
sudo make install
cd /usr/local/lib/R-2.9.2_vg1
sudo /usr/local/src/R-2.9.2/configure --enable-memory-profiling
--with-valgrind-instrumentation=1 r_arch=vg1
sudo make
sudo make install
cd /usr/local/lib/R-2.9.2_vg0
sudo /usr/local/src/R-2.9.2/configure --enable-memory-profiling
--with-valgrind-instrumentation=0 r_arch=vg0
sudo make
sudo make latex
sudo make dvi
sudo make pdf
sudo make info
sudo make help
sudo make html
sudo make uninstall
sudo make install
Why would you do all that? It should work if you do just make && make
install on the subsequent archs. Note that docs etc. are all shared so
it's sufficient to build them in the first arch.
Cheers,
Simon
PS: the config.log entry you sent is entirely irrelevant - it's header
handling test
Now the command "R --arch=vg0" executes fine, but...
da...@david > R --arch=vg1
/usr/local/bin/R: line 230: /usr/local/lib/R/bin/exec/vg1/R: No such
file or
directory
/usr/local/bin/R: line 230: exec: /usr/local/lib/R/bin/exec/vg1/R:
cannot
execute: No such file or directory
da...@david > R --arch=vg2
/usr/local/bin/R: line 230: /usr/local/lib/R/bin/exec/vg2/R: No such
file or
directory
/usr/local/bin/R: line 230: exec: /usr/local/lib/R/bin/exec/vg2/R:
cannot
execute: No such file or directory
is suspect installing to seperate _vg0, _vg1 and _vg2 directories
could be the
problem. I'll retry and post the results.
David
______________________________________________
R-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-devel
