Thank you for the suggestions you have included in the mail. Since this is my first job and this is the first time I am coordinating with a mailing list so I was not aware of these formalities.
My objective of writing this function is to produce a personalized report using "R2HTML". We internally build the predictive models and try to write the report using R2HTML. There I found this problem and still struggling. I will again go through the book you suggested and will update you shortly. Regards, Yashwanth M.R From: Uwe Ligges-3 [via R] [mailto:ml-node+s789695n4432330...@n4.nabble.com] Sent: Wednesday, February 29, 2012 11:20 PM To: Yashwanth M.R Subject: Re: To define a function which includes two functions as arguments such as "plot" and "text" On 28.02.2012 07:04, Yashwanth M.R wrote: > Hi Mr. Uwe Ligges, Yashwanth M.R, this is the R-help mailing list, not my personal mail account (and "Mr." is inappropriate in any case). > > > I really thankful for the reply. I even tried the same, > means writing the new function. But the result is same as the last. Here is > the picture below, > > > > > > Telco.Rpart.PLOT.TEXT.Functn<- > function(Telco.Rpart.METHOD.CLASS) > > { > > Telco.Rpart.PLOT<- > plot(Telco.Rpart.METHOD.CLASS,compress=FALSE,uniform=TRUE) > > Telco.Rpart.TEXT<- > text(Telco.Rpart.METHOD.CLASS,use.n = TRUE, cex = .75) > > } > > > > Telco.Rpart.PLOT.TEXT<- > Telco.Rpart.PLOT.TEXT.Functn(Telco.Rpart.METHOD.CLASS) > > Telco.Rpart.PLOT.TEXT > > > > > > Again if I solely run the command "Telco.Rpart.PLOT.TEXT", That is the value returned from the previous function call, not a command nor a function. > the output it is > displaying as "NULL". Please help me finding out the desired result ASAP. Yes, since that ws the result of calling the previous function. Your output is not reproducible hence it is hard to help for us, we do not really understand what you are going to do with functions, and you should start reading "An Introduction to R" in order to get a basic sense of R. Finally, this is a mailning list driven by volunteers, and sense some rudeness in demanding things "ASAP". Best, Uwe Ligges > > > > > Regards, > > Yashwanth M.R > > > > > > > > From: Uwe Ligges-3 [via R] [mailto:[hidden email]] > > Sent: Friday, February 24, 2012 9:16 PM > To: Yashwanth M.R > Subject: Re: To define a function which includes two functions as arguments > such as "plot" and "text" > > > > > > On 24.02.2012 12:22, Yashwanth M.R wrote: > > >> Here is the two functions which I have used during my practice. >> >> *plot(Telco.rpart.METHOD.CLASS,compress=FALSE,uniform=TRUE) >> >> text(Telco.rpart.METHOD.CLASS,use.n = TRUE, cex = .75))* >> >> "Telco.rpart.METHOD.CLASS" is my "rpart" object of the method "class". >> >> If I run this, >> >> *Telco.Rpart.PLOT.TEXT<- >> c(plot(Telco.rpart.METHOD.CLASS,compress=FALSE,uniform=TRUE), >> text(Telco.rpart.METHOD.CLASS,use.n = TRUE, cex = >> .75)) > > > > c() concatenates the returned values of the two functions. If you want > to define a sequence of function calls, define them within your own > function, calling that new function will produce your desired results, > as far as I understand. > > Uwe Ligges > > >> >> http://r.789695.n4.nabble.com/file/n4416881/Rpart.gif >> >> the output is getting generated as shown in the figure. But if I solely > run >> the same command "Telco.Rpart.PLOT.TEXT" right after the above, the output > >> is as below, >> >> /$x >> [1] 4.035156 1.000000 7.070312 3.015625 2.000000 4.031250 >> [7] 3.000000 5.062500 4.000000 6.125000 5.000000 7.250000 >> [13] 6.500000 6.000000 7.000000 8.000000 11.125000 10.250000 >> [19] 9.500000 9.000000 10.000000 11.000000 12.000000 >> >> $y >> [1] 1.125 1.000 1.000 0.875 0.750 0.750 0.625 0.625 0.500 0.500 0.375 >> [12] 0.375 0.250 0.125 0.125 0.250 0.875 0.750 0.625 0.500 0.500 0.625 >> [23] 0.750 >> / >> >> >> Please help me in getting the output which is there is the Image.. >> >> Regards, >> Yashwanth M,R >> >> -- >> View this message in context: > http://r.789695.n4.nabble.com/To-define-a-function-which-includes-two-functi > ons-as-arguments-such-as-plot-and-text-tp4416881p4416881.html >> Sent from the R help mailing list archive at Nabble.com. >> >> ______________________________________________ >> [hidden email] mailing list >> https://stat.ethz.ch/mailman/listinfo/r-help >> PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html >> and provide commented, minimal, self-contained, reproducible code. > > > ______________________________________________ > [hidden email] mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > > > > _____ > > If you reply to this email, your message will be added to the discussion > below: > > http://r.789695.n4.nabble.com/To-define-a-function-which-includes-two-functi > ons-as-arguments-such-as-plot-and-text-tp4416881p4417618.html > > To unsubscribe from To define a function which includes two functions as > arguments such as "plot" and "text", click here > <http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by > _code&node=4416881&code=eWFzaHdhbnRoQHByZWRpY3RpdmVhbmFseXRpY3MuaW58NDQxNjg4 > MXwyOTE4OTgwMjc=> . > > <http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer <http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&i > &i > d=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamesp > ace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNa > mespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails% > 21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml> NAML > > > > -- > View this message in context: http://r.789695.n4.nabble.com/To-define-a-function-which-includes-two-functi ons-as-arguments-such-as-plot-and-text-tp4416881p4427151.html > Sent from the R help mailing list archive at Nabble.com. > [[alternative HTML version deleted]] > > ______________________________________________ > [hidden email] mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. ______________________________________________ [hidden email] mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. _____ If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/To-define-a-function-which-includes-two-functi ons-as-arguments-such-as-plot-and-text-tp4416881p4432330.html To unsubscribe from To define a function which includes two functions as arguments such as "plot" and "text", click here <http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by _code&node=4416881&code=eWFzaHdhbnRoQHByZWRpY3RpdmVhbmFseXRpY3MuaW58NDQxNjg4 MXwyOTE4OTgwMjc=> . <http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&i d=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamesp ace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNa mespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails% 21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml> NAML -- View this message in context: http://r.789695.n4.nabble.com/To-define-a-function-which-includes-two-functions-as-arguments-such-as-plot-and-text-tp4416881p4434078.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
