On Sun, Nov 07, 2004 at 11:42:33AM +0100, Thomas Sch?nhoff wrote: > right now I'm thinking about running R 2.0.0 on box A (Debian SID) but > at the same time having access to the ressources of box B (Ubuntu > Linux) regarding disk capacity, RAM, idle CPU cycles . Is there anyone > of you that has already installed and administred such a tiny (home > based) cluster? [...] > Are there any recommended methods or tools to realize a two nodes cluster?
The best place to start is probably the high-level snow package which does all clustering in userspace -- i.e. it'll work on your machines just by pulling in the packages it needs. Moreover, as both of your machines are Debian-based, all you need should $ apt-get install r-cran-snow modulo maybe deciding which communications protocol you want to use (pvm or lam/mpi). Another approach is to burn a dvd from the Quantian iso images (see http://dirk.eddelbuettel.com/quantian/) and boot one machine with it (note that there are also some tricks that help you do that without burning a dvd, but that is still the best way to start). You can then boot a second machine rather easily by starting the openMosix Terminalserver that is part of Quantian --- and you second machine can be booted off the first one already running Quantian (provided is can boot via PXE, many recent BIOS support this). That gives you a two-node cluster with openMosix, and you can start, say, two R sessions with lengthy simulations, and one should migrate automagically to other box. Hth, Dirk -- If your hair is standing up, then you are in extreme danger. -- http://www.usafa.af.mil/dfp/cockpit-phys/fp1ex3.htm ______________________________________________ [EMAIL PROTECTED] mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide! http://www.R-project.org/posting-guide.html
