Dear Prof. Ripley, Following your advice, I read the manual and I realized that I missed two lines in my config.site. FC="f95 -xtarget=generic64" FCFLAGS="-O -I/mounts/devel/SUNWspro/prod/include"
This solved my problem. It seemed that these two lines are new since R-2.3.0. I am updating from R-2.2.1. I am very sorry about not reading the manual carefully. ;) Thanks for your help! Dongseok >>> "Prof Brian Ripley" <[EMAIL PROTECTED]> 7/19/2006 2:39 PM >>> How did 'cc -xtarget=generic64' get there? AFAIK R does not know about it, so presumably you specified it for CC. You need to do the same thing for *all* the compilers, that is CC, CXX, F77 and FC. The INSTALL file asked you to read the R-admin manual: there you will find a very similar example for 64-bit Sparc Solaris. That uses -xarch, which seems preferred to -xtarget (or at least to generic targets). On Wed, 19 Jul 2006, Dongseok Choi wrote: > Hello, > > I tried to compile v2.3.1 on Solaris x86 with SUN Pro compilers. > I had an error while stats libarary was being compiled and I notice that > "-xtarget=generic64" was not passed to f95 while cc used it. > Could you tell me how to fix this problem? > > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c sgram.f -o sgram.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c sinerp.f -o sinerp.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c sslvrg.f -o sslvrg.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c stxwx.f -o stxwx.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c hclust.f -o hclust.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c kmns.f -o kmns.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c eureka.f -o eureka.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c stl.f -o stl.o > f95 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c portsrc.f -o portsrc.o > cc -xtarget=generic64 -G -L/mounts/devel/SUNWspro/lib/amd64 > -L/usr/sfw/lib/amd64 -L/mounts/devel/GNU/repoz/readline43/lib/amd64 -o > stats.so init.o kmeans.o ansari.o bandwidths.o chisqsim.o d2x2xk.o fexact.o > kendall.o ks.o line.o smooth.o prho.o swilk.o ksmooth.o loessc.o isoreg.o > Srunmed.o Trunmed.o dblcen.o distance.o hclust-utils.o nls.o HoltWinters.o > PPsum.o arima.o burg.o filter.o mAR.o pacf.o starma.o port.o family.o > bsplvd.o bvalue.o bvalus.o loessf.o ppr.o qsbart.o sbart.o sgram.o sinerp.o > sslvrg.o stxwx.o hclust.o kmns.o eureka.o stl.o portsrc.o -xlic_lib=sunperf > -lsunmath -Rreg -R/mounts/devel/SUNWspro/lib/amd64:/opt/SUNWspro/lib/amd64 > -L/mounts/devel/SUNWspro/prod/lib/amd64 -L/lib/amd64 -L/usr/lib/amd64 -lfui > -lfai -lfsu -lsunmath -lmtsk -lm > ld: fatal: file bsplvd.o: wrong ELF class: ELFCLASS32 > ld: fatal: File processing errors. No output written to stats.so > *** Error code 1 > make: Fatal error: Command failed for target `stats.so' > > I did not have any problem when I compiled v2.2.1 as below: > > cc -xtarget=generic64 -I../../../../include > -I/mounts/devel/SUNWspro/prod/include > -I/mounts/devel/GNU/repoz/readline43/include -D__NO_MATH_INLINES -KPIC -O > -I/mounts/devel/SUNWspro/prod/include -c family.c -o family.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > bsplvd.f -o bsplvd.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > bvalue.f -o bvalue.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > bvalus.f -o bvalus.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > loessf.f -o loessf.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > ppr.f -o ppr.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > qsbart.f -o qsbart.o > cc -xtarget=generic64 -I../../../../include > -I/mounts/devel/SUNWspro/prod/include > -I/mounts/devel/GNU/repoz/readline43/include -D__NO_MATH_INLINES -KPIC -O > -I/mounts/devel/SUNWspro/prod/include -c sbart.c -o sbart.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > sgram.f -o sgram.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > sinerp.f -o sinerp.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > sslvrg.f -o sslvrg.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > stxwx.f -o stxwx.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > hclust.f -o hclust.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > kmns.f -o kmns.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > eureka.f -o eureka.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > stl.f -o stl.o > f95 -xtarget=generic64 -PIC -O -I/mounts/devel/SUNWspro/prod/include -c > portsrc.f -o portsrc.o > cc -xtarget=generic64 -G -L/mounts/devel/SUNWspro/lib/amd64 > -L/usr/sfw/lib/amd64 -L/mounts/devel/GNU/repoz/readline43/lib/amd64 -o > stats.so init.o kmeans.o ansari.o bandwidths.o chisqsim.o d2x2xk.o fexact.o > kendall.o ks.o line.o smooth.o prho.o swilk.o ksmooth.o loessc.o isoreg.o > Srunmed.o Trunmed.o dblcen.o distance.o hclust-utils.o nls.o HoltWinters.o > PPsum.o arima.o burg.o carray.o filter.o mburg.o myw.o pacf.o qr.o starma.o > port.o family.o bsplvd.o bvalue.o bvalus.o loessf.o ppr.o qsbart.o sbart.o > sgram.o sinerp.o sslvrg.o stxwx.o hclust.o kmns.o eureka.o stl.o portsrc.o > -xlic_lib=sunperf -lsunmath -Rreg > -R/mounts/devel/SUNWspro/lib/amd64:/opt/SUNWspro/lib/amd64 > -L/mounts/devel/SUNWspro/prod/lib/amd64 -L/lib/amd64 -L/usr/lib/amd64 -lfui > -lfai -lfsu -lsunmath -lmtsk -lm > mkdir ../../../../library/stats/libs > > > Thank you very much!! > > > > > Dongseok Choi, Ph.D. > Assistant Professor > Division of Biostatistics > Department of Public Health & Preventive Medicine > Oregon Health & Science University > 3181 SW Sam Jackson Park Road, CB-669 > Portland, OR 97239-3098 > TEL) 503-494-5336 > FAX) 503-494-4981 > [EMAIL PROTECTED] > > > [[alternative HTML version deleted]] > > ______________________________________________ > [email protected] mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > -- Brian D. Ripley, [EMAIL PROTECTED] Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/ University of Oxford, Tel: +44 1865 272861 (self) 1 South Parks Road, +44 1865 272866 (PA) Oxford OX1 3TG, UK Fax: +44 1865 272595 [[alternative HTML version deleted]] ______________________________________________ [email protected] mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
