Hi,
This is something that has gotten quite a bit of attention recently due
to the coming R 3.4 giving a NOTE when routines aren't declared. You
should be able to find info on this list or elsewhere.
Basically you need to make a file called e.g. init.c in your src/ with
the appropriate code. This file can be auto-generated for you as
described by Dirk here:
http://dirk.eddelbuettel.com/blog/2017/03/30/#002_even_easier_package_registration
Good luck!
Ege
On 04/13/2017 11:14 PM, Vineetha Warriyar Kodalore Vijayan wrote:
Hi,
When I submitted my R package to CRAN, it didn't go through the automatic
incoming check, resulting the following NOTE. I tested on my macOS with R CMD
CHECK and R CMD --as-cran, both went through with one NOTE ( Maintainer: NOTE).
* checking compiled code ... NOTE
File 'EpiILM/libs/i386/EpiILM.dll':
Found no calls to: 'R_registerRoutines', 'R_useDynamicSymbols'
File 'EpiILM/libs/x64/EpiILM.dll':
Found no calls to: 'R_registerRoutines', 'R_useDynamicSymbols'
It is good practice to register native routines and to disable symbol
search.
See 'Writing portable packages' in the 'Writing R Extensions' manual.
I did go through the manual (section 5.4), but didn't understand much. Can
someone help to resolve this issue?
Thanks,
Vineetha
[[alternative HTML version deleted]]
______________________________________________
R-package-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-package-devel
______________________________________________
R-package-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-package-devel
