I need apply the function "lowess" and that (from what I understand) it
take values from all layers of the stack at the same time. But, "lapply or
loop" run function for each layer not for one cell and all the layers, And
is for that I'm think need a rasterBrick instead a rasterStack

The code is something like:

 out<-stack(list.files(pattern='*.tiff$)
 filename<-rasterTmpFile()


    out<-writeStart(out,filename,overwrite=TRUE)
    bs<-blockSize(out)
    pb<-pbCreate(bs$n)
    for (i in 1:bs$n){
      v<-getValues(out,row=bs$row[i],nrows=bs$nrows[i])
*      s<-t(sapply(apply(v,1,lowess,f=7/n,iter=10),"[[","y"))*
      out<-writeValues(out,s,bs$row[i])
      pbStep(pb,i)
    }



2013/5/8 Nagle, Nicholas <[email protected]>

>  Stacks can be treated as lists of RasterLayers.  So use writeStart on
> lists of rasters.
>
>
>  Options to consider:
> 1) You could either loop (or lapply) through list, modifying the original
> TIFs with new data.
> 2) Create a new stack (not in memory) of RasterLayers with empty values.
>  You can use one of the MODIS stack layers as a template for these new
> layers, and then loop (lapply) through the stack, using writeStart on each
> Layer, or
> 3) create a new brick (not in memory!) with the necessary dimensions, and
> then use writeStart on this with the calculated values.  Again, you should
> be able to use one of the stack layers as a template to create this brick.
>
>
>  Only method 1) will modify the original TIFs and put the new values
> alongside the original MODIS values.  I don't know how important it is to
> duplicate the original MODIS pixel values along with whatever values you
> are creating.
> Method 2) will create lots of individual, manageable files.  You could
> modify the naming convention of the original MODIS files.
> Method 3) will keep all of the new values together in one big file.
>
>  Sometimes I am doing analysis for myself, and don't need to pass the
> data along to someone else.  In these instances, I often just save the new
> values as R data.frames, and just inject subsets of the data.frame into
> RasterLayers at the time of plotting.
>
>  Nicholas
>
>
>
>
>  On May 8, 2013, at 9:23 AM, Francisco Zambrano <[email protected]>
>  wrote:
>
>  Howdy Nicholas,
>
>  Thanks for your answer. In the beginning I did the stack, but to make a
> function using "writeStart", this function works with "rasterBrick" objects
> and not with 'rasterStack'. That is the reason why I need to make a brick.
>
>  I don't know what could be the most efficent solution.
>
>  My solution in this moment is as follow:
>
>  1.- Create the 'rasterStack'
> 2.- Save with 'writeRaster(rasterStack,filename)
> 3.- Open it with "brick(filenanme)"
> 4.- Use the function writeStart
>
>  Thats is the better way or exist another option?
>
>
>
> 2013/5/8 Nagle, Nicholas <[email protected]>
>
>> Dear Francisco,
>>
>> I am working with the same time series of MOD09 data, but I leave it as a
>> stack, rather than create the brick.
>> Why do you need it as a brick?  The problem with brick is that it needs
>> the data to be in one file.  That's a big file in this instance (Tb
>> scale?).  And, since you didn't specify a filename, R is going to try and
>> do this in memory, and will need to create virtual memory for this.  11
>> hours doesn't sound unreasonable for this.
>>
>> Why not just leave it as a stack?  I've found it to work pretty well.
>>  Otherwise, be sure to specify the filename so that R doesn't try to to
>> this in memory.  But that still might take time, and is probably a needless
>> recopy of a large amount of data.
>>
>> Nicholas
>>
>>
>>
>> Nicholas Nagle, Assistant Professor
>> Department of Geography
>> Burchfiel Geography Building 307
>> University of Tennessee
>> Knoxville, TN 37996
>>
>>
>> > Date: Tue, 7 May 2013 10:35:00 -0400
>> > From: Francisco Zambrano <[email protected]>
>> > To: [email protected]
>> > Subject: [R-sig-Geo] How to write functions with mutiple large raster
>> >       data    file (MOD13Q1, 2000-2012)
>> > Message-ID:
>> >       <CANE=RDO9N-WmnjKTbqnzkeFN=
>> [email protected]>
>> > Content-Type: text/plain
>> >
>> > Hi everybody,
>> >
>> > I'm working with MODIS data MOD13Q1 and the NDVI index between 2000-
>> today.
>> > I have been trying to do a function, but I have a problem when stack the
>> > 310 files and then I tried to use the writeStart function. I had an
>> error
>> > because the startFuction work with rasterLayer or RasterBrick. But,
>> when I
>> > tried to make the brick with the rasterStack (>brick(rasterStack)) the
>> > operation took too much time (11 hours)
>> >
>> > My question, is what is the most efficiently way to make a rasterBrick
>> from
>> > multiple raster (geoTIFF) files?
>> >
>> > save the rasterStack and then open it with brick?
>> >
>> > My code is something like:
>> >
>> >> out<-stack(list.files(pattern=*..tif$))
>> >> out<-brick(mod) #too much time (11 hours appox)
>> >
>> >> out<-writeStart(out,filename,overwrite=TRUE)
>> >> bs<-blockSize(out)
>> >> pb<-pbCreate(bs$n)
>> >> for (i in 1:bs$n){
>> >    v<-getValues(out,row=bs$row[i],nrows=bs$nrows[i])
>> >    s<-t(sapply(apply(v,1,lowess,f=7/n,iter=10),"[[","y"))
>> >    out<-writeValues(out,s,bs$row[i])
>> >   pbStep(pb,i)
>> >  }
>> >
>> > Kind Regards
>> >
>> > Francisco Zambrano Bigiarini
>> >
>> > from Chile, latin america
>>
>>
>
>
>  --
> “El que te roba una idea se queda con un pedazo de tí, pero pierde dos
> pedazos de sí: la imaginación y el honor”
>
>
>


-- 
“El que te roba una idea se queda con un pedazo de tí, pero pierde dos
pedazos de sí: la imaginación y el honor”

        [[alternative HTML version deleted]]

_______________________________________________
R-sig-Geo mailing list
[email protected]
https://stat.ethz.ch/mailman/listinfo/r-sig-geo

Reply via email to