Hello I have tried as you. On Mac the way to succeed might be to partition your mac on 2 systems. The Mac os The Ubuntu I have tried many attempts. I decided to work to make sure I use r and r commander Best Regards Henri
2012/5/8 Simon Urbanek <[email protected]> > Joe, > > On May 8, 2012, at 8:53 AM, Joe Schwab wrote: > > > Hello all, > > > > I am in the process of installing the latest CRAN repository versions of > Rserve (0.6-8) and FastRWeb (1.0-1) on MacOS 10.6.8 machine. I have > installed Rserve and verified that it can start up just fine on its own > both by using the following commands in the R GUI: > > > > library(Rserve) > > Rserve(args="--no-save") > > > > and by running "R CMD Rserve" from the command line. > > > > After doing either of those methods I can telnet to my localhost port > 6311 and verify that Rserve is running. > > That's entirely irrelevant since FastRWeb doesn't use TCP/IP - make sure > you are running the correct Rserve settings which are *not* on port 6311. > All you need to do it to use the start script. > > > > However, when I try to start Rserve > > (after killing any existing processes) by using the FastRWeb > > code/start script, I get the following error: > > > > ##> SOCK_ERROR: bind error #13(access denied) > > > > You seem to have permission issues on the socket or the FastRWeb directory > - check the permissions on > /var/FastRWeb/socket > You should make sure that _www has both read and write access. Remove it > before starting if in doubt. If it's not there, make sure that the user > under which you run Rserve has write permissions in /vat/FastRWeb. That > applies to the other directories as well - it will need write permissions > on tmp and _www must be able to read web.R and tmp. > > Cheers, > Simon > > PS: stats-rosuda-devel is the mailing list for Rserve/FastRWeb questions > > > > When I go into R GUI and run this under debug mode I get the same end > > result. Here is the session transcript from R: > > > > # START SESSION TRANSCRIPT > >> Rserve(TRUE, args="--RS-conf /var/FastRWeb/code/rserve.conf --vanilla > --no-save") > > Starting Rserve on port 6311 : > > /Library/Frameworks/R.framework/Resources/bin/R CMD > > > /Library/Frameworks/R.framework/Versions/2.15/Resources/library/Rserve/libs/x86_64/Rserve-dbg.so > > --RS-conf /var/FastRWeb/code/rserve.conf --vanilla --no-save > > > > Note: debug version of Rserve doesn't daemonize so your R session will > > be blocked until you shut down Rserve. > > Rserve 0.6-8 (338) (C)Copyright 2002-2011 Simon Urbanek > > $Id: Rserv.c 338 2012-02-11 20:52:25Z urbanek $ > > > > Loading config file /etc/Rserv.conf > > Failed to find config file /etc/Rserv.conf > > Loading config file /var/FastRWeb/code/rserve.conf > > conf> command="socket", parameter="/var/FastRWeb/socket" > > conf> command="sockmod", parameter="0666" > > conf> command="source", parameter="/var/FastRWeb/code/rserve.R" > > Found source entry "/var/FastRWeb/code/rserve.R" > > conf> command="control", parameter="enable" > > Loaded config file /var/FastRWeb/code/rserve.conf > > > > R version 2.15.0 (2012-03-30) > > Copyright (C) 2012 The R Foundation for Statistical Computing > > ISBN 3-900051-07-0 > > Platform: x86_64-apple-darwin9.8.0/x86_64 (64-bit) > > > > R is free software and comes with ABSOLUTELY NO WARRANTY. > > You are welcome to redistribute it under certain conditions. > > Type 'license()' or 'licence()' for distribution details. > > > > Natural language support but running in an English locale > > > > R is a collaborative project with many contributors. > > Type 'contributors()' for more information and > > 'citation()' on how to cite R or R packages in publications. > > > > Type 'demo()' for some demos, 'help()' for on-line help, or > > 'help.start()' for an HTML browser interface to help. > > Type 'q()' to quit R. > > > > Executing source/eval commands from the config file. > > voidEval("try(source("/var/FastRWeb/code/rserve.R"))") > > voidEval: buffer parsed, stat=1, parts=1 > > result type: 20, length: 1 > > R_tryEval(xp,R_GlobalEnv,&Rerror); > > Calling R_tryEval for expression 1 [type=6] ... > > Starting Rserve on pc24015 > > Loading packages... > > XML: FALSE > > Cairo: TRUE > > Matrix: TRUE > > FastRWeb: TRUE > > ##> SOCK_ERROR: bind error #13(access denied) > > Expression 1, error code: 0 > > Done with initial commands. > > Rserve: Ok, ready to answer queries. > > > > # END SESSION TRANSCRIPT > > > > At this point there is no Rserve process running, and telnetting to > > port 6311 confirms no process is listening on that port. Any guidance > > or help would be appreciated. > > > > Cheers, > > Joe Schwab > > > > _______________________________________________ > > R-SIG-Mac mailing list > > [email protected] > > https://stat.ethz.ch/mailman/listinfo/r-sig-mac > > > > > > _______________________________________________ > R-SIG-Mac mailing list > [email protected] > https://stat.ethz.ch/mailman/listinfo/r-sig-mac > -- Henri Henri äº¨å© (HÄng lì) 33 6 79 66 26 64 [[alternative HTML version deleted]]
_______________________________________________ R-SIG-Mac mailing list [email protected] https://stat.ethz.ch/mailman/listinfo/r-sig-mac
