Howdy,
I understand what Todd  is asking about the multi-site and I think there are
some good points made for him.... what he is doing is not what I thought
 "multi-site" was but is certainly not an invalid use.... just one I have
not thought of before. When I saw the multi-site I thought it was for
domains and subdomains only... but he is wanting to use it in a more
"silo'd" way...

When I first saw the post, I was thinking that he had the same problem that
I had.... If I had say *.test.domain.com setup AND
foo.test.domain.comsetup... the later would only work if it was ABOVE
the prior in the "sites"
tab....

Just a thought on the sites implementation... what If the list of sites on
the "pages" tab were in a drop down instead of listed across the top? I am
almost out of space on the top row....

Thanks for noticin'

Matt Lankford
ThePartTimeCTO.com



On Tue, Dec 16, 2008 at 6:35 PM, <radiant-requ...@radiantcms.org> wrote:

> Send Radiant mailing list submissions to
>        radiant@radiantcms.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.radiantcms.org/mailman/listinfo/radiant
> or, via email, send a message with subject or body 'help' to
>        radiant-requ...@radiantcms.org
>
> You can reach the person managing the list at
>        radiant-ow...@radiantcms.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Radiant digest..."
>
>
> Today's Topics:
>
>   1. Multi-site Extension (Todd Mcgregor)
>   2. Re: Multi-site Extension (Michael Kessler)
>   3. Re: Multi-site Extension (Michael Kessler)
>   4. Re: Multi-site Extension (Todd Mcgregor)
>   5. Re: Re: Multi-site Extension (Michael Kessler)
>   6. Re: Re: Multi-site Extension (Michael Kessler)
>   7. Re: Radiant for Bloging - Admin::PagesController is the   root
>      problem (Joe Van Dyk)
>   8. Re: Radiant for Bloging - articles (Mohit Sindhwani)
>   9. Re: Radiant for Bloging - Admin::PagesController is the   root
>      problem (Anton J Aylward)
>  10. Re: Radiant for Bloging - Admin::PagesController is the   root
>      problem (Sean Cribbs)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 16 Dec 2008 20:19:30 +0100
> From: Todd Mcgregor <todd_mcgre...@yahoo.com>
> Subject: [Radiant] Multi-site Extension
> To: radi...@lists.radiantcms.org
> Message-ID: <d000eb5e3f340112c7263f9630da3...@ruby-forum.com>
> Content-Type: text/plain; charset=utf-8
>
> I've installed the multi-site extension, which is most excellent, but I
> can't figure out the URL patterns needed to navigate to each of my
> different sites. Can someone using multi-site give me the quick idiot's
> guide to using this extension? I've configured my sites, I just can't
> view them. I'm using the built-in WEBrick web server for development.
> --
> Posted via http://www.ruby-forum.com/.
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 16 Dec 2008 20:23:26 +0100
> From: Michael Kessler <mi...@netzpiraten.ch>
> Subject: Re: [Radiant] Multi-site Extension
> To: radi...@lists.radiantcms.org, radiant@radiantcms.org
> Message-ID: <2c36cae3-776c-4af3-9164-315f0f31c...@netzpiraten.ch>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> Todd,
>
> Try this settings:
>
> Domain match: .*www\.yourdomain\.com[.\/]*
> Base domain: www.yourdomain.com
>
> Michael
>
> On 16 Dec 2008, at 8:19 PM, Todd Mcgregor wrote:
>
> > I've installed the multi-site extension, which is most excellent,
> > but I
> > can't figure out the URL patterns needed to navigate to each of my
> > different sites. Can someone using multi-site give me the quick
> > idiot's
> > guide to using this extension? I've configured my sites, I just can't
> > view them. I'm using the built-in WEBrick web server for development.
> > --
> > Posted via http://www.ruby-forum.com/.
> > _______________________________________________
> > Radiant mailing list
> > Post:   Radiant@radiantcms.org
> > Search: http://radiantcms.org/mailing-list/search/
> > Site:   http://lists.radiantcms.org/mailman/listinfo/radiant
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 16 Dec 2008 20:23:26 +0100
> From: Michael Kessler <mi...@netzpiraten.ch>
> Subject: Re: [Radiant] Multi-site Extension
> To: radi...@lists.radiantcms.org, radiant@radiantcms.org
> Message-ID: <2c36cae3-776c-4af3-9164-315f0f31c...@netzpiraten.ch>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> Todd,
>
> Try this settings:
>
> Domain match: .*www\.yourdomain\.com[.\/]*
> Base domain: www.yourdomain.com
>
> Michael
>
> On 16 Dec 2008, at 8:19 PM, Todd Mcgregor wrote:
>
> > I've installed the multi-site extension, which is most excellent,
> > but I
> > can't figure out the URL patterns needed to navigate to each of my
> > different sites. Can someone using multi-site give me the quick
> > idiot's
> > guide to using this extension? I've configured my sites, I just can't
> > view them. I'm using the built-in WEBrick web server for development.
> > --
> > Posted via http://www.ruby-forum.com/.
> > _______________________________________________
> > Radiant mailing list
> > Post:   Radiant@radiantcms.org
> > Search: http://radiantcms.org/mailing-list/search/
> > Site:   http://lists.radiantcms.org/mailman/listinfo/radiant
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 16 Dec 2008 20:48:35 +0100
> From: Todd Mcgregor <todd_mcgre...@yahoo.com>
> Subject: [Radiant] Re: Multi-site Extension
> To: radi...@lists.radiantcms.org
> Message-ID: <e9a71aec5cefdef453984af6c0e3a...@ruby-forum.com>
> Content-Type: text/plain; charset=utf-8
>
> Michael Kessler wrote:
> > Todd,
> >
> > Try this settings:
> >
> > Domain match: .*www\.yourdomain\.com[.\/]*
> > Base domain: www.yourdomain.com
> >
> > Michael
>
> Thanks for the reply. I should probably clarify what I'm doing. I'm
> running Radiant on my local machine on port 3000 so my URL is
> http://localhost:3000. Assuming I have defined two sites, named site1
> and site2, how would I set up each site so I could access them like so -
> http://localhost:3000/site1 and http://localhost:3000/site2?
>
> -Todd
> --
> Posted via http://www.ruby-forum.com/.
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 16 Dec 2008 21:08:17 +0100
> From: Michael Kessler <mi...@netzpiraten.ch>
> Subject: Re: [Radiant] Re: Multi-site Extension
> To: radi...@lists.radiantcms.org, radiant@radiantcms.org
> Message-ID: <cd5cf263-daff-47e8-8db6-0b9da5a77...@netzpiraten.ch>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> I don't know if it is possible to run multiple radiant sites under
> different contexts on a single domain, but I have had some problems to
> run normal rails apps with that setup months ago.
>
> I have different development sites running under a single domain, but
> I use a setup with canonical names DNS entries.
>
> So you could try something like this:
>
> Site 1 Domain match: .*site1\.yourdomain\.com[.\/]*
> Site 1 Base domain: site1.yourdomain.com
>
> Site 2 Domain match: .*site2\.yourdomain\.com[.\/]*
> Site 2 Base domain: site2.yourdomain.com
>
> for production and for development  just add
>
> 127.0.0.1       site1.localhost site2.localhost
>
> to your host config file and then use
>
> Site 1 Domain match: .*site1\.localhost[.\/]*
> Site 1 Base domain: site1.localhost
>
> Site 2 Domain match: .*site2\.localhost[.\/]*
> Site 2 Base domain: site2.localhost
>
> Hope this helps
> Michael
>
> On 16 Dec 2008, at 8:48 PM, Todd Mcgregor wrote:
>
> > Michael Kessler wrote:
> >> Todd,
> >>
> >> Try this settings:
> >>
> >> Domain match: .*www\.yourdomain\.com[.\/]*
> >> Base domain: www.yourdomain.com
> >>
> >> Michael
> >
> > Thanks for the reply. I should probably clarify what I'm doing. I'm
> > running Radiant on my local machine on port 3000 so my URL is
> > http://localhost:3000. Assuming I have defined two sites, named site1
> > and site2, how would I set up each site so I could access them like
> > so -
> > http://localhost:3000/site1 and http://localhost:3000/site2?
> >
> > -Todd
> > --
> > Posted via http://www.ruby-forum.com/.
> > _______________________________________________
> > Radiant mailing list
> > Post:   Radiant@radiantcms.org
> > Search: http://radiantcms.org/mailing-list/search/
> > Site:   http://lists.radiantcms.org/mailman/listinfo/radiant
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 16 Dec 2008 21:08:17 +0100
> From: Michael Kessler <mi...@netzpiraten.ch>
> Subject: Re: [Radiant] Re: Multi-site Extension
> To: radi...@lists.radiantcms.org, radiant@radiantcms.org
> Message-ID: <cd5cf263-daff-47e8-8db6-0b9da5a77...@netzpiraten.ch>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> I don't know if it is possible to run multiple radiant sites under
> different contexts on a single domain, but I have had some problems to
> run normal rails apps with that setup months ago.
>
> I have different development sites running under a single domain, but
> I use a setup with canonical names DNS entries.
>
> So you could try something like this:
>
> Site 1 Domain match: .*site1\.yourdomain\.com[.\/]*
> Site 1 Base domain: site1.yourdomain.com
>
> Site 2 Domain match: .*site2\.yourdomain\.com[.\/]*
> Site 2 Base domain: site2.yourdomain.com
>
> for production and for development  just add
>
> 127.0.0.1       site1.localhost site2.localhost
>
> to your host config file and then use
>
> Site 1 Domain match: .*site1\.localhost[.\/]*
> Site 1 Base domain: site1.localhost
>
> Site 2 Domain match: .*site2\.localhost[.\/]*
> Site 2 Base domain: site2.localhost
>
> Hope this helps
> Michael
>
> On 16 Dec 2008, at 8:48 PM, Todd Mcgregor wrote:
>
> > Michael Kessler wrote:
> >> Todd,
> >>
> >> Try this settings:
> >>
> >> Domain match: .*www\.yourdomain\.com[.\/]*
> >> Base domain: www.yourdomain.com
> >>
> >> Michael
> >
> > Thanks for the reply. I should probably clarify what I'm doing. I'm
> > running Radiant on my local machine on port 3000 so my URL is
> > http://localhost:3000. Assuming I have defined two sites, named site1
> > and site2, how would I set up each site so I could access them like
> > so -
> > http://localhost:3000/site1 and http://localhost:3000/site2?
> >
> > -Todd
> > --
> > Posted via http://www.ruby-forum.com/.
> > _______________________________________________
> > Radiant mailing list
> > Post:   Radiant@radiantcms.org
> > Search: http://radiantcms.org/mailing-list/search/
> > Site:   http://lists.radiantcms.org/mailman/listinfo/radiant
>
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 16 Dec 2008 14:40:35 -0800
> From: "Joe Van Dyk" <j...@pinkpucker.net>
> Subject: Re: [Radiant] Radiant for Bloging - Admin::PagesController is
>        the     root problem
> To: radiant@radiantcms.org
> Message-ID:
>        <c715e640812161440h2e1a982bp78e3fdba60115...@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Mon, Dec 15, 2008 at 9:38 AM, Sean Cribbs <seancri...@gmail.com> wrote:
> > All of the extensions in the 'radiant' user on GitHub were updated to
> match
> > the latest Radiant edge code.  If you want to use them on 0.6.9 or
> earlier,
> > you'll need to check out an older revision.
>
> Would it be possible to use branches for either the master (edge) or
> for 0.6.9 versions for the extensions?
>
> Joe
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 17 Dec 2008 08:15:56 +0900
> From: Mohit Sindhwani <t...@onghu.com>
> Subject: Re: [Radiant] Radiant for Bloging - articles
> To: Jay Levitt <j...@jay.fm>
> Cc: radiant@radiantcms.org
> Message-ID: <494836ac.1020...@onghu.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Jay Levitt wrote:
> > Mohit Sindhwani wrote:
> >> Jay Levitt wrote:
> >>> John Toups wrote:
> >>>> I want to agree with Eric regarding the Summer Reboot.
> >>>
> >>> And I keep poking my nose into Radiant every few weeks, but it's
> >>> slow going.  I saw one very, very complicated thread, where just the
> >>> *answer* to "if I figure something out, where should I post the
> >>> answer?" ran to half a page.
> >> oh!  That might have been me giving instructions on how to actually
> >> add a page to the Reboot!  :(
> >
> > ISTR it was more meta than that.. something like "In theory, you would
> > add it to the reboot, but that's still unofficial, so there's the
> > wiki, only there are actually two wikis, but we're moving things, so
> > you might want to..."
> Ah!  That wasn't me!  It was someone who had just started out and was
> unhappy about the fragmentation of the documentation because it was
> difficult to figure out what to read and where to add things... yes,
> it's time to unify - summer's gone!
>
> Cheers,
> Mohit.
> 12/17/2008 | 8:15 AM.
>
>
>
> ------------------------------
>
> Message: 9
> Date: Tue, 16 Dec 2008 18:22:50 -0500
> From: Anton J Aylward <a...@si.on.ca>
> Subject: Re: [Radiant] Radiant for Bloging - Admin::PagesController is
>        the     root problem
> To: radiant@radiantcms.org
> Message-ID: <4948384a....@si.on.ca>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Joe Van Dyk said the following on 12/16/2008 05:40 PM:
> > On Mon, Dec 15, 2008 at 9:38 AM, Sean Cribbs <seancri...@gmail.com>
> wrote:
> >> All of the extensions in the 'radiant' user on GitHub were updated to
> match
> >> the latest Radiant edge code.  If you want to use them on 0.6.9 or
> earlier,
> >> you'll need to check out an older revision.
> >
> > Would it be possible to use branches for either the master (edge) or
> > for 0.6.9 versions for the extensions?
>
> ... and if so, to post instructions for git-klutzes like myself.
>
> --
> There is no legitimate religion apart from truth.
>    --John Calvin
>
>
> ------------------------------
>
> Message: 10
> Date: Tue, 16 Dec 2008 18:33:46 -0500
> From: Sean Cribbs <seancri...@gmail.com>
> Subject: Re: [Radiant] Radiant for Bloging - Admin::PagesController is
>        the     root problem
> To: aja+radiantc...@si.on.ca <aja%2bradiantc...@si.on.ca>,
> radiant@radiantcms.org
> Message-ID: <49483ada.40...@gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Anton J Aylward wrote:
> > Joe Van Dyk said the following on 12/16/2008 05:40 PM:
> >
> >> On Mon, Dec 15, 2008 at 9:38 AM, Sean Cribbs <seancri...@gmail.com>
> wrote:
> >>
> >>> All of the extensions in the 'radiant' user on GitHub were updated to
> match
> >>> the latest Radiant edge code.  If you want to use them on 0.6.9 or
> earlier,
> >>> you'll need to check out an older revision.
> >>>
> >> Would it be possible to use branches for either the master (edge) or
> >> for 0.6.9 versions for the extensions?
> >>
> >
> > ... and if so, to post instructions for git-klutzes like myself.
> >
> >
> The proper way would be to use tags.  I'll get some minions to attach
> tags to the extensions to something before the past weekend.
>
> Sean
>
>
> ------------------------------
>
> _______________________________________________
> Radiant mailing list
> Post:   Radiant@radiantcms.org
> Search: http://radiantcms.org/mailing-list/search/
> Site:   http://lists.radiantcms.org/mailman/listinfo/radiant
>
> End of Radiant Digest, Vol 33, Issue 27
> ***************************************
>
_______________________________________________
Radiant mailing list
Post:   Radiant@radiantcms.org
Search: http://radiantcms.org/mailing-list/search/
Site:   http://lists.radiantcms.org/mailman/listinfo/radiant

Reply via email to