Hi John and all.

I hope someone can reassure John that it works OK on BSDI.
One telling question for you John:

Did the regression test suite (ie make test) succeed on your box?
If that worked, then move to a simple configuration like goodies/simple.cfg
and work from there.

Hope that helps.
I would normally give very close attention to your problem: because I am
travelling its very hard. I hope you will have some success with the above
and the asistance of the list. If not I will be able to help you personally
on March 15.

Cheers.


----------------------------------------------------------------------------
---------------
Mike McCauley                                 [EMAIL PROTECTED]
Open System Consultants                 +61 3 9598 0985

Mike is travelling right now, and there may be delays
in our correspondence.
-----Original Message-----
From: C Thompson <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Friday, March 05, 1999 6:10 AM
Subject: (RADIATOR) any BSDI 4 users out there


>After banging my head around on this, I'd like to take a different
>approach.
>
>Are there any BSDI 4 users who successfully got Radiator 2.12.1 to work
>with BSDI 4?
>
>If so, would you mind sending a snippet of your radius.cfg and 'users' file
>(with passwords xx'ed out of course) for me to look at?
>
>Thanks,
>
>
>Craig Thompson
>----------------------------------------------------------------------
>WingNET Internet Services,
>P.O. Box 3000 // Cleveland, TN 37320-3000
>423-559-LINK (v)  423-559-5444 (f)
>http://www.wingnet.net
>----------------------------------------------------------------------
>
>If you think that there is good in everybody, you haven't met everybody.
>
>
>===
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
>


===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to