Pjason        Auth-Type = System, Prefix = "P", NAS-Port-Type = Async, 
Called-Station-Id = "3830001"
                Service-Type = Framed-User,
                Framed-Protocol = PPP,
                Framed-IP-Address = 206.129.156.2,
                Framed-IP-Netmask = 255.255.255.255,
                Framed-Routing = Broadcast-Listen,
                Framed-MTU = 1500,
                Session-Timeout = 28800,
                Idle-Timeout = 1200,
                Port-Limit = 1

DEFAULT Auth-Type = Reject, Prefix = "P", Group = "shutoff"
DEFAULT Auth-Type = Reject, Group = "shutoff"

DEFAULT Auth-Type = Reject, Prefix = "P", Group = "poponly"
DEFAULT Auth-Type = Reject, Group = "poponly"

DEFAULT Auth-Type = System, Prefix = "P", NAS-Port-Type = ISDN, Group = "dualisdn", 
Called-Station-Id = "4240001"
        Service-Type = Framed-User,
        Framed-Protocol = PPP,
        Framed-MTU = 1500,
        Session-Timeout = 28800,
        Idle-Timeout = 1200,
        Port-Limit = 2

Should this work out of box by using a simple AuthFILE in the .cfg?
The auth system is FreeBSD, we have expiration field set in master.passwd.
Will this work to expire radius logins also?

Thanks :)

- Jason


===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to