Hello-
In attempting to assemble a radius proxying machine I'm having one issue
with receiving reply attributes from one of the hosts. For other realms I
can receive the replies fine with the static ip's & everything. However
for the DEFAULT realm, I'm not receiving any attributes.
*** Sending to xxx.xxx.xxx.xxx port xxxx ....
Code: Access-Request
Identifier: 75
Authentic: Value
Attributes:
User-Name = "USER"
User-Password = "
NAS-IP-Address = xxx.xxx.xxx.xxx
NAS-Port = 258
Acct-Session-Id = "16842936"
USR-Interface-Index = 1514
Service-Type = Login-User
USR-Chassis-Call-Slot = 2
USR-Chassis-Call-Span = 16
USR-Chassis-Call-Channel = 2
Calling-Station-Id = ""
Called-Station-Id = "5150"
USR-Connect-Speed = NONE
NAS-Port-Type = Async
Sun Dec 26 13:28:31 1999: WARNING: Malformed request packet: Attribute 26
with length 2: ignored
Sun Dec 26 13:28:31 1999: DEBUG: Packet dump:
*** Received from xxx.xxx.xxx.xxx port xxxx ....
Code: Access-Accept
Identifier: 75
Authentic: <Correct Authentic>
Attributes:
The Attributes received are blank.
I've done some searching on the mailing list archive without much
luck. Chances are I've boneheaded something here, but it also could be
the fruity config on that radius host as well. Any ideas for further
troubleshooting?
Steve
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
