Hi everyone,
I'm using the Handler below, with the intention being that it only
authenticates with the AuthBy UNIX method if the AuthBy RADIUS one before it
ignores the request. This is how I understand it to work according to the
manual's description of the AuthByPolicy directive.
However, when sending requests, both AuthBy blocks seem to be used, and both
are returning stuff.
How I can I make it only use the AuthBy UNIX if the AuthBy RADIUS ignores
the request?
Andrew
<Handler
NAS-IP-Address=/202.85.92.1|202.85.92.2|202.85.93.1|202.85.93.3|202.85.93.4|
202.85.94.1|202.85.94.2|202.85.95.1|202.85.96.1|202.85.98.1|202.85.98.2|202.
85.99.1/>
AcctLogFileName /var/log/radacct/pstn/detail
AuthByPolicy ContinueWhileIgnore
<AuthBy RADIUS>
Host localhost
AuthPort 1812
AcctPort 1813
Secret testing123
Retries 0
RetryTimeout 10
</AuthBy>
<AuthBy UNIX>
Filename %D/pstn.aaa
DefaultReply Service-Type=Framed,Ascend-Idle-Limit=3600
</AuthBy>
</Handler>
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
