I am trying to figure out how to support different vendor access devices with the same user files. In this case I have Ascend TNTs that need the following to setup a dial on demand subnet. Service-Type=Framed, Framed-Protocol=PPP, Framed-IP-Address=216.228.86.161, Framed-IP-Netmask=255.255.255.224, Framed-Compression=Van-Jacobsen-TCP-IP, Framed-MTU=1500 And another box that needs Service-Type=Framed, Framed-Protocol=PPP, Framed-IP-Address=216.228.86.161, Framed-Route=216.228.86.160/27, Framed-Compression=Van-Jacobsen-TCP-IP, Framed-MTU=1500 To make it work. My preference would be to put Service-Type=Framed, Framed-Protocol=PPP, Framed-IP-Address=216.228.86.161, Framed-IP-Netmask=255.255.255.224, Framed-Route=216.228.86.160/27, Framed-Compression=Van-Jacobsen-TCP-IP, Framed-MTU=1500 Into the user file and strip the appropriate lines based on the client. I have looked at the StripFromReply and would love to use that, however it does not appear to work in the client section. Any ideas are greatly appreciated. John Hough IWBC.NET === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
