Hello,
I'm trying to configure my radiator server to work with secureid
but i'm having some problems. I'm using radiator radius ver 2.14.1 running
on linux 6.0. My ace server is ver 4.0 running on NT.
thank you
=====================
here is the logfile
=====================
Tue Feb 1 02:11:20 2000: DEBUG: Packet dump:
*** Received from 127.0.0.1 port 1035 ....
Code: Access-Request
Identifier: 230
Authentic: 1234567890123456
Attributes:
User-Name = "[EMAIL PROTECTED]"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
User-Password = "<139><234>&<156><157>o=<192><132><8>:<152><216>}x<153>"
Tue Feb 1 02:11:20 2000: DEBUG: Handling request with Handler
'Realm=info.com.ph'
Tue Feb 1 02:11:20 2000: DEBUG: Rewrote user name to ray
Tue Feb 1 02:11:20 2000: DEBUG: Deleting session for [EMAIL PROTECTED],
203.63.154.1, 1234
Tue Feb 1 02:11:20 2000: DEBUG: Handling with Radius::AuthRADIUS
Tue Feb 1 02:11:20 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1645 ....
Code: Access-Request
Identifier: 17
Authentic: 1234567890123456
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
User-Password =
"<207><182>e<18><215><235><255><160><130><21><244><149><20>_ev"
Tue Feb 1 02:11:25 2000: DEBUG: Packet dump:
*** Received from 127.0.0.1 port 1035 ....
Code: Accounting-Request
Identifier: 231
Authentic: <241>dry<219><175>.q<251><214><143>6<9><134><192><200>
Attributes:
User-Name = "[EMAIL PROTECTED]"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
Tue Feb 1 02:11:25 2000: DEBUG: Handling request with Handler
'Realm=info.com.ph'
Tue Feb 1 02:11:25 2000: DEBUG: Rewrote user name to ray
Tue Feb 1 02:11:25 2000: DEBUG: Adding session for [EMAIL PROTECTED],
203.63.154.1, 1234
Tue Feb 1 02:11:25 2000: DEBUG: Handling with Radius::AuthRADIUS
Tue Feb 1 02:11:25 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 18
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
Timestamp = 949342285
Acct-Delay-Time = 0
Tue Feb 1 02:11:30 2000: DEBUG: Packet dump:
*** Received from 127.0.0.1 port 1035 ....
Code: Accounting-Request
Identifier: 232
Authentic: )h6y<206><253><27>x<162><23><152><181><254>;<29>d
Attributes:
User-Name = "[EMAIL PROTECTED]"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
Tue Feb 1 02:11:30 2000: DEBUG: Handling request with Handler
'Realm=info.com.ph'
Tue Feb 1 02:11:30 2000: DEBUG: Rewrote user name to ray
Tue Feb 1 02:11:30 2000: DEBUG: Deleting session for [EMAIL PROTECTED],
203.63.154.1, 1234
Tue Feb 1 02:11:30 2000: DEBUG: Handling with Radius::AuthRADIUS
Tue Feb 1 02:11:30 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 19
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
Timestamp = 949342290
Tue Feb 1 02:11:41 2000: DEBUG: Packet dump:
*** Received from 203.172.11.86 port 1645 ....
Code: Access-Accept
Identifier: 17
Authentic: <168><246><253>i<15><225><246><5><176>`<229>X<12><229>D<129>
Attributes:
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Netmask = 255.255.255.255
Framed-MTU = 1500
Acct-Status-Type = Accounting-On
NAS-Port-Type = Async
Reply-Message = "PASSCODE Accepted<10>"
Tue Feb 1 02:11:41 2000: DEBUG: Received reply in AuthRADIUS for req 17
from 203.172.11.86:1645
Tue Feb 1 02:11:41 2000: DEBUG: Packet dump:
*** Sending to 127.0.0.1 port 1035 ....
Code: Access-Accept
Identifier: 230
Authentic: 1234567890123456
Attributes:
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Netmask = 255.255.255.255
Framed-MTU = 1500
Acct-Status-Type = Accounting-On
NAS-Port-Type = Async
Reply-Message = "PASSCODE Accepted<10>"
Tue Feb 1 02:12:10 2000: DEBUG: Timed out, retransmitting
Tue Feb 1 02:12:10 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 20
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
Timestamp = 949342210
Acct-Delay-Time = 120
Tue Feb 1 02:12:15 2000: DEBUG: Timed out, retransmitting
Tue Feb 1 02:12:15 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 21
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 120
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
Timestamp = 949342215
Tue Feb 1 02:12:21 2000: INFO: AuthRADIUS: No reply after 1 retransmissions
Tue Feb 1 02:12:21 2000: INFO: AuthRADIUS: No response from any RADIUS
hosts. Ignoring
Tue Feb 1 02:12:26 2000: INFO: AuthRADIUS: No reply after 1 retransmissions
Tue Feb 1 02:12:26 2000: INFO: AuthRADIUS: No response from any RADIUS
hosts. Ignoring
Tue Feb 1 02:12:31 2000: DEBUG: Timed out, retransmitting
Tue Feb 1 02:12:31 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 22
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
Timestamp = 949342231
Acct-Delay-Time = 120
Tue Feb 1 02:12:36 2000: DEBUG: Timed out, retransmitting
Tue Feb 1 02:12:36 2000: DEBUG: Packet dump:
*** Sending to 203.172.11.86 port 1646 ....
Code: Accounting-Request
Identifier: 23
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ray"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 120
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
Timestamp = 949342236
===================
here is my cf file
===================
# radius.cfg
Foreground
AuthPort 1645
AcctPort 1646
Trace 4
LogDir /data/LOGFILE
DbDir /usr/local/etc/raddb
<Client localhost>
Secret mysecret
DupInterval 0
</Client>
<Client somme.ip.address>
Secret somesecret
IgnoreAcctSignature
DupInterval 0
</Client>
<Realm some.domain>
RewriteUsername s/^([^@]+).*/$1/
AcctLogFileName %L/detail
AcctLogFileFormat %m %d %Y %H:%M:%S NAS-IP-Address=%{NAS-IP-Address}
NAS-Port=%{NAS-Port} User-Name=%{User-Name}
Called-Station-Id=%{Called-Station-Id}
Calling-Station-Id=%{Calling-Station-Id}
Acct-Status-Type=%{Acct-Status-Type} Service-Type=%{Service-Type}
Acct-Session-Id=%{Acct-Session-Id} Framed-Protocol=%{Framed-Protocol}
Framed-IP-Address=%{Framed-IP-Address} Acct-Session-Time=%{Acct-Session-Time}
<AuthBy RADIUS>
Host some.ipaddress
Secret somesecret
AuthPort 1645
AcctPort 1646
DefaultReply
Service-Type=Framed-User,Framed-Protocol=PPP,Framed-MTU=1500,NAS-Port-Type=A
sync,Framed-IP-Netmask=255.255.255.255
Retries 1
RetryTimeout 120
</AuthBy>
</Realm>
=====================
here is the display on the monitor
after running adpwtst
=====================
sending Access-Request...
No reply
sending Accounting-Request Start...
No reply
sending Accounting-Request Stop...
No reply
*****************************************************************
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material of Infocom Technologies Inc.� Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient is
prohibited.�� If you received this in error, please contact the sender and
delete the material from any computer.
******************************************************************
�
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
